On 1/6/2011 5:05 PM, Carl wrote:
> For the 3CX800 its actually a stainless ring that fits over the tube with a
> push and lock in place arrangement. It has 3 L legs with screw holes welded
> to it that anchor to the matching chimney.
>
> Both parts are complicated and pricey like all things Eimac.
What about using the collet (anode ring ) from the GU74B? Would it fit?
There is one currently on e-bay
http://cgi.ebay.com/GU74B-Anode-Ring-and-Teflon-Air-Shield-/330509657662?pt=LH_DefaultDomain_0&hash=item4cf3e9263e
73
Roger (K8RI)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|