Amps
[Top] [All Lists]

Re: [Amps] DIN vs N

To: Amps <Amps@contesting.com>
Subject: Re: [Amps] DIN vs N
From: jeff millar <jeff@wa1hco.net>
Date: Sun, 24 Apr 2011 23:19:13 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
This reminds me of an event during the June VHF Contest. The 432 Station running
about 800W quit. It used a DIN 7/16 on the GS-35b amp with a DIN to N adapter.
We debugged it to the an open circuit in the adapter. On dismantling the adapter
it had a very small pin, about the same diameter as 18 to 20 gauge wire that
connected between the larger pins for the N and DIN sides. This adapter was one
of hundreds that became surplus from the cellular industry.

Also, I once picked up a bag full of what I thought were a very weird silver
plated N Female to F female adapters. But after looking at the burned N to DIN
adapter, it now seems like some company made a series of between series adapters
that could screw together with what looks like F series threads and use an RG-59
sized center pin.

Watch out.

jeff, wa1hco


On 04/24/2011 08:39 AM, Carl wrote:

> I havent dared run my big 432 amp close to that level yet until all the feed
> line and antenna connectors are upgraded.
>
> Carl
> KM1H

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>