Amps
[Top] [All Lists]

Re: [Amps] shaft couplers and extensions

To: "Dave Baxter" <dave@uk-ar.co.uk>, <amps@contesting.com>
Subject: Re: [Amps] shaft couplers and extensions
From: "James R Carr" <n7fcf@hctc.com>
Date: Fri, 26 Aug 2011 17:59:00 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The Swan 350 uses Auto fuel hose pushed onto a 1/4 inch shaft. Been working 
for years.
Jim
N7FCF
----- Original Message ----- 
From: "Dave Baxter" <dave@uk-ar.co.uk>
To: <amps@contesting.com>
Sent: Friday, August 26, 2011 12:08 PM
Subject: Re: [Amps] shaft couplers and extensions


Model engineering shops?  Those that deal in parts for gas engined miniture 
racing cars?

For real light duty (next to no torque) some heavy gauge plastic tube (coax 
outer sheath?) pushed over the ends of 1/4" shafts, often works OK, 
insulates, and has a modicom of flex.  Good as a temporary fix, if nothing 
else.

73.

Dave G0WBX.


------- Original Message -------
Message: 2
Date: Fri, 26 Aug 2011 13:33:33 -0400 (EDT)
From: K1SG@aol.com
Subject: Re: [Amps] shaft couplers and extensions
To: amps@contesting.com
Message-ID: <9945.7e5c7874.3b8932ed@aol.com>
Content-Type: text/plain; charset="US-ASCII"

Oddball stuff is getting harder to find these days!
I'm looking for a few shaft extensions, couplers, flexible  couplers, right
angle shaft couplers and the like for my current  kluge amp project.  I
used to have a variety of them, but they've been used  or given away or 
grown
up and left home or been lost in moves.  I've looked  in the Grainger and
small parts online catalogs, but I'm not seeing anything for  what used to 
be
standard 1/4" shafts, just big stuff.  Any suggestions  for?

Steve  Gilbert
K1SG
K1SG@AOL.com
508-435-9133



--------------------------------------------------------------------------------


> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>