look at photo #44 u can c switch above load cap.going by front panel
layout the band sw is on top of load cap top r/h corner look at front
panel from the front of de amp. look like a fairly heavy but only
single pole!!
HNY to all
Quoting "Fuqua, Bill L" <wlfuqu00@uky.edu>:
> I looked at the pictures and did not see a bandswitch and noticed a
> few odd things.
> One, was that one end of plate coil was grounded. maybe this was
> just a temporary
> position while positioning things. The only vacuum relay I saw was
> a TR Switch.
> However, I noticed the use of what appeared to be "Red" toroids for
> parasitic supressors.
> 73
> Bill wa4lav
>
> ________________________________________
> From: amps-bounces@contesting.com [amps-bounces@contesting.com] On
> Behalf Of Hsu [hsu4qro@gmail.com]
> Sent: Thursday, December 22, 2011 3:04 AM
> To: amps@contesting.com
> Subject: [Amps] Dans amp band switch
>
> Dans amp use HV relay, Could anybody can tell me where can get the
> relay? here is the pictures
> http://www.oz7akt.dk/MyPowerAmp/Danamps/amp.htm
> 73!Hsu
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|