[Amps] IMD, richard courtway, 2011/12/29

• Re: [Amps] IMD, Jim W7RY, 2011/12/30
  • Re: [Amps] IMD, Rob Atkinson, 2011/12/31
• Re: [Amps] IMD, Roger, 2011/12/30
• Re: [Amps] IMD, Roger (K8RI), 2011/12/30
• Re: [Amps] IMD, Robert Groh, 2011/12/30
• Re: [Amps] IMD, Jim Brown, 2011/12/30
  • Re: [Amps] IMD, donroden, 2011/12/31
• Re: [Amps] IMD, jeff millar, 2011/12/31

[Amps] AL-1500 for legal-limit 160m AM?, Jim Barber, 2011/12/29

• Re: [Amps] AL-1500 for legal-limit 160m AM?, Al Kozakiewicz, 2011/12/30
• Re: [Amps] AL-1500 for legal-limit 160m AM?, Carl, 2011/12/30
  • Re: [Amps] AL-1500 for legal-limit 160m AM?, Jim Barber, 2011/12/30
    • Re: [Amps] AL-1500 for legal-limit 160m AM?, Rob Atkinson, 2011/12/31

[Amps] Alpha low drive mod resistors, rick darwicki, 2011/12/28

• Re: [Amps] Alpha low drive mod resistors, Carl, 2011/12/28
• Re: [Amps] Alpha low drive mod resistors, Colin Lamb, 2011/12/28
  • Re: [Amps] Alpha low drive mod resistors, Carl, 2011/12/29

[Amps] Resurrecting the Dead..., Mike Baker, 2011/12/28

• Re: [Amps] Resurrecting the Dead..., Carl, 2011/12/28

[Amps] Centurion, GARY SWARTOUT, 2011/12/28

• Re: [Amps] Centurion, Rob Atkinson, 2011/12/29
  • Re: [Amps] Centurion, Jim W7RY, 2011/12/30
    • Re: [Amps] Centurion, GARY SWARTOUT, 2011/12/30
    • Re: [Amps] Centurion, Rob Atkinson, 2011/12/30
    • Re: [Amps] Centurion, GARY SWARTOUT, 2011/12/31
    • Re: [Amps] Centurion, Rob Atkinson, 2011/12/31
• Re: [Amps] Centurion, Rob Atkinson, 2011/12/29

[Amps] Centurion 422, GARY SWARTOUT, 2011/12/28

• Re: [Amps] Centurion 422, Jim W7RY, 2011/12/28

[Amps] Emtron DX-3 PRICE REDUCED FOR CHRISTMAS, Michael Raskin, 2011/12/25

• Re: [Amps] Emtron DX-3 PRICE REDUCED FOR CHRISTMAS, Peter Voelpel, 2011/12/27

[Amps] Anti-Corona Paint, Eddy Swynar, 2011/12/25

• Re: [Amps] Anti-Corona Paint, Fuqua, Bill L, 2011/12/27
• Re: [Amps] Anti-Corona Paint, Ron Youvan, 2011/12/27
• Re: [Amps] Anti-Corona Paint, Eric Lowell, 2011/12/27
  • Re: [Amps] Anti-Corona Paint, donroden, 2011/12/28
• Re: [Amps] Anti-Corona Paint, Roger, 2011/12/27
• Re: [Amps] Anti-Corona Paint AND MILD SCREW/BOLT LOCKING MATERIAL, Gene May, 2011/12/27
• Re: [Amps] Anti-Corona Paint, Mark Robinson, 2011/12/27
  • Re: [Amps] Anti-Corona Paint, rbethman, 2011/12/28
• Re: [Amps] Anti-Corona Paint, John Becker, 2011/12/28
  • Re: [Amps] Anti-Corona Paint, Fuqua, Bill L, 2011/12/29

[Amps] 87a blower, K1WPO, Joe, 2011/12/23

• Re: [Amps] 87a blower, Mike Andrews, 2011/12/23

[Amps] Dans amp band switch, Hsu, 2011/12/22

• Re: [Amps] Dans amp band switch, Fuqua, Bill L, 2011/12/23
  • Re: [Amps] Dans amp band switch, Rex Lint, 2011/12/27
  • Re: [Amps] Dans amp band switch, vk3pa, 2011/12/28
  • Re: [Amps] Dans amp band switch, vk3pa, 2011/12/28

Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, TexasRF, 2011/12/22

• Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Frank, 2011/12/23
  • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Carl, 2011/12/23
  • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Jim Brown, 2011/12/25
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Carl, 2011/12/27
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Jim Brown, 2011/12/27
• Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Fuqua, Bill L, 2011/12/23
  • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, jeff millar, 2011/12/25
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Fuqua, Bill L, 2011/12/27
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, chas, 2011/12/28
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Larry Benko, 2011/12/28
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Adrian, 2011/12/29
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Larry Benko, 2011/12/30
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Fuqua, Bill L, 2011/12/29
    • [Amps] Fwd: Re: Fwd: Linear Amplifier Tuning---PROPERLY!, jeff millar, 2011/12/27
    • Re: [Amps] Fwd: Re: Fwd: Linear Amplifier Tuning---PROPERLY!, Gary Schafer, 2011/12/28
    • Re: [Amps] Fwd: Re: Fwd: Linear Amplifier Tuning---PROPERLY!, jeff millar, 2011/12/28
    • Re: [Amps] Fwd: Re: Fwd: Linear Amplifier Tuning---PROPERLY!, Gary Schafer, 2011/12/28
    • Re: [Amps] Fwd: Re: Fwd: Linear Amplifier Tuning---PROPERLY!, jeff millar, 2011/12/28
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Carl, 2011/12/27
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Roger (K8RI), 2011/12/28
• Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Commander John, 2011/12/27
  • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Gary Schafer, 2011/12/28
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Commander John, 2011/12/28
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Roger (K8RI), 2011/12/28
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Fuqua, Bill L, 2011/12/29
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Roger (K8RI), 2011/12/29
  • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, jeff millar, 2011/12/28
• [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Jim Thomson, 2011/12/28
  • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Roger (K8RI), 2011/12/28
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Gary Schafer, 2011/12/29
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Carl, 2011/12/29
• [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Jim Thomson, 2011/12/28
  • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Fuqua, Bill L, 2011/12/29
    • [Amps] FW: Fwd: Linear Amplifier Tuning---PROPERLY!, Fuqua, Bill L, 2011/12/30
• [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Jim Thomson, 2011/12/30

[Amps] Making RS-4XX interfaces RF resistant, Jim Barber, 2011/12/22

• Re: [Amps] Making RS-4XX interfaces RF resistant, Jim Brown, 2011/12/23
• Re: [Amps] Making RS-4XX interfaces RF resistant, Dave, 2011/12/23

[Amps] Alpha 87a - Internal Fan Motor/Blower, Brian Moran, 2011/12/21

• Re: [Amps] Alpha 87a - Internal Fan Motor/Blower, Mike Andrews, 2011/12/21
  • Re: [Amps] Alpha 87a - Internal Fan Motor/Blower, Gary Smith, 2011/12/22

[Amps] Linear amplifier tuning, Edwin Karl, 2011/12/21

• [Amps] Linear amplifier tuning, Jim Thomson, 2011/12/21

[Amps] Linear Amplifier Tuning---PROPERLY!, Eddy Swynar, 2011/12/19

• Re: [Amps] Linear Amplifier Tuning---PROPERLY!, Jim W7RY, 2011/12/20
  • Re: [Amps] Linear Amplifier Tuning---PROPERLY!, Eddy Swynar, 2011/12/20
    • Re: [Amps] Linear Amplifier Tuning---PROPERLY!, Carl, 2011/12/21
    • Re: [Amps] Linear Amplifier Tuning---PROPERLY!, Ron Youvan, 2011/12/21
• [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Eddy Swynar, 2011/12/20
  • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, donroden, 2011/12/21
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Bill Fuqua, 2011/12/21
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Eddy Swynar, 2011/12/21
    • Re: [Amps] Fwd: Linear Amplifier Tuning---PROPERLY!, Carl, 2011/12/22
• Re: [Amps] Linear Amplifier Tuning---PROPERLY!, Carl, 2011/12/20

Re: [Amps] Is after-powerdown cooling desirable?, Jim Garland, 2011/12/19

• Re: [Amps] Is after-powerdown cooling desirable?, Roger (K8RI), 2011/12/20
• Re: [Amps] Is after-powerdown cooling desirable?, rbethman, 2011/12/21
• [Amps] Is after-powerdown cooling desirable?, John Lyles, 2011/12/20
• [Amps] Is after-powerdown cooling desirable?, Jim Thomson, 2011/12/20
  • Re: [Amps] Is after-powerdown cooling desirable?, Charles Harpole, 2011/12/21
    • Re: [Amps] Is after-powerdown cooling desirable?, Charles Harpole, 2011/12/21
  • Re: [Amps] Is after-powerdown cooling desirable?, Peter Voelpel, 2011/12/21
• Re: [Amps] Is after-powerdown cooling desirable?, TexasRF, 2011/12/22

[Amps] Warm up and on time question... PWM ramping, John Lyles, 2011/12/18

• Re: [Amps] Warm up and on time question... PWM ramping, vk3pa, 2011/12/19

[Amps] home brew 811a amp - need some advice, Ulf (SM0NOR), 2011/12/18

• Re: [Amps] home brew 811a amp - need some advice, Vic K2VCO, 2011/12/19
  • Re: [Amps] home brew 811a amp - need some advice, Carl, 2011/12/20
• Re: [Amps] home brew 811a amp - need some advice, Carl, 2011/12/19
  • Re: [Amps] home brew 811a amp - need some advice, Ulf (SM0NOR), 2011/12/19
    • Re: [Amps] home brew 811a amp - need some advice, Thomas Carlsson, 2011/12/20

[Amps] any 572 cheap source?, Felipe Ceglia, 2011/12/18

• Re: [Amps] any 572 cheap source?, Carl, 2011/12/19
  • Re: [Amps] any 572 cheap source?, Hsu, 2011/12/20
• Re: [Amps] any 572 cheap source?, Felipe Ceglia, 2011/12/19

[Amps] Need/Wanted: GS31B tubes, Kees - pa7two, 2011/12/16

• Re: [Amps] Need/Wanted: GS31B tubes, Kees - pa7two, 2011/12/18

Re: [Amps] Shipment of large old tubes, Colin Lamb, 2011/12/16

• Re: [Amps] Shipment of large old tubes, Fuqua, Bill L, 2011/12/18
• Re: [Amps] Shipment of large old tubes, Pete Lancashire, 2011/12/21
  • Re: [Amps] Shipment of large old tubes, Patrick Barthelow, 2011/12/21
    • Re: [Amps] Shipment of large old tubes, Pete Lancashire, 2011/12/21
    • Re: [Amps] Shipment of large old tubes, Patrick Barthelow, 2011/12/21
    • Re: [Amps] Shipment of large old tubes, Ron Youvan, 2011/12/22
  • Re: [Amps] Shipment of large old tubes, Radio WC6W, 2011/12/21
• Re: [Amps] Shipment of large old tubes, Rob Atkinson, 2011/12/20
  • Re: [Amps] Shipment of large old tubes, Carl, 2011/12/21

[Amps] Alpha87a lock-out, Walter Muth, 2011/12/16

• Message not available
  • Re: [Amps] Alpha87a lock-out, Walter Muth, 2011/12/16

Re: [Amps] Xmas special offer upadate( warranty and pictures), Hsu, 2011/12/16

• Re: [Amps] [rfamplifiers] Re: Xmas special offer upadate( warranty and pictures), Herschel Williamson, 2011/12/21
  • Re: [Amps] [rfamplifiers] Re: Xmas special offer upadate( warranty and pictures), Vic K2VCO, 2011/12/21

[Amps] SB-1000 160 m power down, Han Higasa, 2011/12/16

• Message not available
  • Re: [Amps] SB-1000 160 m power down, Han Higasa, 2011/12/18
    • Re: [Amps] SB-1000 160 m power down, Han Higasa, 2011/12/22
    • Re: [Amps] SB-1000 160 m power down, Vic Rosenthal, 2011/12/23
• Re: [Amps] SB-1000 160 m power down, TexasRF, 2011/12/18

[Amps] Warm up and on time question..., Dave Cole, 2011/12/13

• Re: [Amps] Warm up and on time question..., Jim W7RY, 2011/12/14
  • [Amps] Need 4CX250B tubes / 432 MHz amplifier, Glen Zook, 2011/12/16
• Re: [Amps] Warm up and on time question..., Dave Cole, 2011/12/14
• Re: [Amps] Warm up and on time question..., Charles Harpole, 2011/12/14
  • Re: [Amps] Warm up and on time question..., Carl, 2011/12/16
    • Re: [Amps] Warm up and on time question..., Roger, 2011/12/18
    • Re: [Amps] Warm up and on time question..., Patrick Barthelow, 2011/12/19
• Re: [Amps] Warm up and on time question..., BJ VOUTE, 2011/12/14
  • Re: [Amps] Warm up and on time question..., Carl, 2011/12/16
    • Re: [Amps] Warm up and on time question..., BJ VOUTE, 2011/12/16
    • Re: [Amps] Warm up and on time question..., Carl, 2011/12/16
    • Re: [Amps] Warm up and on time question..., Roger (K8RI), 2011/12/18
  • Re: [Amps] Warm up and on time question..., Patrick Barthelow, 2011/12/16
  • Re: [Amps] Warm up and on time question..., Roger, 2011/12/16
• Re: [Amps] Warm up and on time question..., Hsu, 2011/12/14
• [Amps] Warm up and on time question..., Jim Thomson, 2011/12/14
• Re: [Amps] Warm up and on time question..., Mike Baker, 2011/12/16
  • Re: [Amps] Warm up and on time question..., Carel, pc5m, 2011/12/16
    • Re: [Amps] Warm up and on time question..., Roger (K8RI), 2011/12/18
  • Re: [Amps] Warm up and on time question..., Radio WC6W, 2011/12/23

[Amps] Xmas special offer, Hsu, 2011/12/13

• Re: [Amps] Xmas special offer, Hsu, 2011/12/18

[Amps] PRO III and ALpha 76, rick darwicki, 2011/12/10

• Re: [Amps] PRO III and ALpha 76, Joe Subich, W4TV, 2011/12/11
• Re: [Amps] PRO III and ALpha 76, Roger (K8RI), 2011/12/11

[Amps] ICOM PRO III QSK, rick darwicki, 2011/12/08

• Re: [Amps] ICOM PRO III QSK, Jim W7RY, 2011/12/09
  • Re: [Amps] ICOM PRO III QSK, Joe Subich, W4TV, 2011/12/09
    • Re: [Amps] ICOM PRO III QSK, Jim W7RY, 2011/12/10
    • Re: [Amps] ICOM PRO III QSK, Joe Subich, W4TV, 2011/12/10
    • Re: [Amps] ICOM PRO III QSK, Jim W7RY, 2011/12/10
    • Re: [Amps] ICOM PRO III QSK, Joe Subich, W4TV, 2011/12/10
    • Re: [Amps] ICOM PRO III QSK, Jim W7RY, 2011/12/10
    • Message not available
    • Re: [Amps] ICOM PRO III QSK, Jim W7RY, 2011/12/10
    • Re: [Amps] ICOM PRO III QSK, Ian White GM3SEK, 2011/12/11
    • Re: [Amps] ICOM PRO III QSK, Joe Subich, W4TV, 2011/12/12
    • Re: [Amps] ICOM PRO III QSK, Larry Benko, 2011/12/10
    • Re: [Amps] ICOM PRO III QSK, Jim W7RY, 2011/12/11
    • Re: [Amps] ICOM PRO III QSK, Larry Benko, 2011/12/11
• Re: [Amps] ICOM PRO III QSK, Roger Parsons, 2011/12/13
  • [Amps] Alpha 87a famous Fault 9, Charles Harpole, 2011/12/14
    • Re: [Amps] Alpha 87a famous Fault 9, Dick Green WC1M, 2011/12/16

[Amps] rectifier diode modules, Jim Garland, 2011/12/06

• Re: [Amps] rectifier diode modules, Carl, 2011/12/07
• [Amps] rectifier diode modules, Jim Thomson, 2011/12/08

Re: [Amps] Silver plated Cu strap sources?, bob, 2011/12/04

• [Amps] Silver plated Cu strap sources?, WB3EXR, 2011/12/06
  • Re: [Amps] Silver plated Cu strap sources?, bob, 2011/12/06
• [Amps] Silver plated Cu strap sources?, John Lyles, 2011/12/06
  • Re: [Amps] Silver plated Cu strap sources?, Charles Harpole, 2011/12/07
• Re: [Amps] Silver plated Cu strap sources?, Manfred Mornhinweg, 2011/12/07
• [Amps] Silver plated Cu strap sources?, Jim Thomson, 2011/12/08

[Amps] Replacing 3-500Z tubes with 4-400A tubes, John King, 2011/12/04

• Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Carl, 2011/12/05
• Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Bill Fuqua, 2011/12/06
  • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Carl, 2011/12/06
    • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Bill Fuqua, 2011/12/06
    • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Carl, 2011/12/06
    • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Bill Fuqua, 2011/12/07
    • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Carl, 2011/12/08
    • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, donroden, 2011/12/09
    • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Carl, 2011/12/10
    • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, Glen Zook, 2011/12/10
    • Re: [Amps] Replacing 3-500Z tubes with 4-400A tubes, donroden, 2011/12/10
    • [Amps] SB-220 filament pin cooling was: Re: Replacing 3-500Z tubes with 4-400A tubes, Pete Smith, 2011/12/07
    • Re: [Amps] SB-220 filament pin cooling was: Re: Replacing 3-500Z tubes with 4-400A tubes, Carl, 2011/12/08
    • Re: [Amps] SB-220 filament pin cooling was: Re: Replacing 3-500Z tubes with 4-400A tubes, Pete Smith, 2011/12/08
• [Amps] Replacing 3-500Z tubes with 4-400A tubes, Jim Thomson, 2011/12/08

[Amps] 2 x 3-500Z filament choke + 30/60/80A fil chokes, Jim Thomson, 2011/12/04

• Re: [Amps] 2 x 3-500Z filament choke + 30/60/80A fil chokes, Carl, 2011/12/04
  • Re: [Amps] 2 x 3-500Z filament choke + 30/60/80A fil chokes, Jim Thomson, 2011/12/05
    • Re: [Amps] 2 x 3-500Z filament choke + 30/60/80A fil chokes, Carl, 2011/12/06
• [Amps] 2 x 3-500Z filament choke + 30/60/80A fil chokes, Jim Thomson, 2011/12/07
  • Re: [Amps] 2 x 3-500Z filament choke + 30/60/80A fil chokes, Carl, 2011/12/08
    • Re: [Amps] 2 x 3-500Z filament choke + 30/60/80A fil chokes, Jim Thomson, 2011/12/08

[Amps] Cetron 811a., Ulf (SM0NOR), 2011/12/04

• Re: [Amps] Cetron 811a., Ulf (SM0NOR), 2011/12/06
  • Re: [Amps] Cetron 811a., Eddy Swynar, 2011/12/06
    • Re: [Amps] Cetron 811a., Ulf (SM0NOR), 2011/12/06
  • Re: [Amps] Cetron 811a., Carl, 2011/12/06
    • Re: [Amps] Cetron 811a., Ulf (SM0NOR), 2011/12/06

[Amps] 2 x 3-500Z filament choke, Iain, 2011/12/02

• [Amps] 2 x 3-500Z filament choke, Iain, 2011/12/02
  • Re: [Amps] 2 x 3-500Z filament choke, Carl, 2011/12/04
    • Re: [Amps] 2 x 3-500Z filament choke, Iain, 2011/12/04
  • [Amps] re eimac 3cx1200 tube, Fern, 2011/12/04

Re: [Amps] best deal for Mallory caps?, Carl, 2011/12/02

• Re: [Amps] best deal for Mallory caps?, Jim Brown, 2011/12/04
  • Re: [Amps] best deal for Mallory caps?, Carl, 2011/12/04
    • Re: [Amps] best deal for Mallory caps?, Jim Brown, 2011/12/04
• [Amps] best deal for Mallory caps?, Jim Thomson, 2011/12/04

[Amps] FW: Can distilled water be used for a dummy load ??, km5vi, 2011/12/02

• [Amps] FW: Can distilled water be used for a dummy load ??, km5vi, 2011/12/02

Re: [Amps] Arcing 8877, TexasRF, 2011/12/02

• Re: [Amps] Arcing 8877, Han Higasa, 2011/12/02

Re: [Amps] Can distilled water be used for a dummy load ??, Carl, 2011/12/02

• Re: [Amps] Can distilled water be used for a dummy load ??, donroden, 2011/12/02
  • Re: [Amps] Can distilled water be used for a dummy load ??, Paul Christensen, 2011/12/02
• Re: [Amps] Can distilled water be used for a dummy load ??, dd3ly, 2011/12/02
• Re: [Amps] Can distilled water be used for a dummy load ??, Dr. David Kirkby, 2011/12/02
• [Amps] Can distilled water be used for a dummy load ??, Jim Thomson, 2011/12/04