Joe Subich, W4TV wrote:
> > I have seen that too but it was strictly limited to the IC-7000.
>
>The study I saw (not the AD5X article) was not limited to the IC-7000.
>The "premature release" applied to all of the "small" radios 706/7000
>as well as several of the full size radios - including 7700, 746Pro,
>and I believe the ProIII - when using the ACC jack instead of the Send
>relay.
>
Would it help to connect the two outputs in parallel, to get the fastest
possible turn-on from HSEND, and then a slightly delayed release from
the relay?
HSEND -> [transistor switch] -> [ACC output in parallel] -> amp
--
73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|