Amps
[Top] [All Lists]

Re: [Amps] AL-1500 for legal-limit 160m AM?

To: "'audioguy@q.com'" <audioguy@q.com>, "Amps@contesting.com" <Amps@contesting.com>
Subject: Re: [Amps] AL-1500 for legal-limit 160m AM?
From: Al Kozakiewicz <akozak@hourglass.com>
Date: Thu, 29 Dec 2011 16:27:00 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I know it's not AM, but I have an AL-1500 that I use for RTTY contesting at 
maximum output.  It runs for hours at a time without problems.  I believe I've 
read (maybe in the manual?) that it was rated for 1500W output continuous for 
30 minutes at a clip.

Al
AB2ZY

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On 
Behalf Of Jim Barber
Sent: Wednesday, December 28, 2011 9:54 PM
To: Amps@contesting.com
Subject: [Amps] AL-1500 for legal-limit 160m AM?

I'm considering an AL-1500 as a backup amp, tilted to favor 160m AM operation.
They are (relatively) inexpensive to buy, and I've cached up enough new and 
like-new 8877's to last a long, long time with decent treatment.

My question is if anyone here has been successful long-term running an AL-1500 
at or near the legal limit on 160m AM? To be explicitly clear, I'm talking 
about running 375 watts carrier and 1500 watts PEP modulated output, with 
key-down times that (in my case at least) *can* go two to three minutes, 
generally with breaks at least that long and usually longer between 
transmissions.

So - do you think the overall power supply, the tank circuit, plate choke, 
cooling etc are up to the task? Even things like underrated parts in the tuned 
input can be more of an issue with full-power AM than SSB.

Opinions solicited and TIA,
Jim, N7CXI

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>