Hi members;
Still have repeared and updated a old TL 922 amplifier with some published mods
for a hamfriend.
I like to do some power tests but I still not have used in past a TL922 in
conjunction with a Yaesu FT1000D.
Can I interconnect the ALC of the Yaesu FT1000D with the ALC circuit of a
Kenwood TL922 (different suppliers,different specifications) ?
I saw in the Yaesu FT1000D manual that the input ALC voltage comming from the
amplifier will be 0 to -4 VDC !!
In the manual of the Kenwood TL922 are not marked any specifications and
suggestions around.
Only that the I-plate may not exceed 650mA and the I-grid may not exceed the
200mA !
Any experiences and suggestions around this subject will be welcome.
Kindly regards es 73's Jean.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|