What is the drawback to putting the plate choke at the low impedance end of
the tank circuit? If the blocking cap was after the load cap, the load cap
would need to be rated for about the same voltage as the tune cap. If the
blocking cap was between the end of the plate coil and the loading cap, what
kind of current would the cap have to handle?
How does placing the blocking cap at the low impedance part of the tank
affect its value as opposed to the high impedance end of the circuit?
NG9R
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|