On 3/20/2012 3:48 PM, Mr Mike wrote:
> SLOOOOOOwwwllly workeing on a single gs-35b amp.
>
> I puchased a blower that is rated at 110 cfm @ .5" SP
>
> I am planning to make the HV p/s a seperate unit and am toying with the idea
> of remoting the blower as well, to reduce noise.
> In this design there would be a 3" diam flexible tube running from P//S
> blower cabinet to remote amp chassis, about 6 feet long.
>
> I know flexible exhaust pipe would work, ants certainly tough enough, but has
> anyone any more aesthetically pleasing ideas?
I don't know about more aesthetically pleasing, but to me the dryer hose
is far too fragile. I'd pick the hose like we use with drops for the big
all shop dust collectors. Of course the fan used for suction on one of
those would provide plenty of air if turned around to blow instead of
suck. OTOH you'd want the fan in another room. Some are the size of a
snow blower and "Loud". The hose is available from Ace, Lowe's, and
Home Depot as well as many other sources. It is normally black and
considerably heavier and much more robust than dryer hose. I think it
typically comes in either 4 or 5" with adapters to smaller sizes.
73
Roger (K8RI)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|