Amps
[Top] [All Lists]

Re: [Amps] Tubes vs. Solid State (was) Expert Amps 2K-FA: Any Opinions ?

To: Rob Atkinson <ranchorobbo@gmail.com>
Subject: Re: [Amps] Tubes vs. Solid State (was) Expert Amps 2K-FA: Any Opinions ?
From: "Joe Giacobello, K2XX" <k2xx@swva.net>
Reply-to: k2xx@swva.net
Date: Sun, 29 Apr 2012 19:22:27 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Rob, just out of curiosity, what is the key down time on the 2.5 KW THP?

73, Joe
K2XX

On 4/29/2012 1:11 PM, Rob Atkinson wrote:
>> Most of the tube designs have been significantly "over engineered".
>> That is, the tubes have excess plate dissipation for the power output
>> and grids that will take a significant beating.
>>
> What you are saying is tube amps would fail if they were not "over
> engineered" but assuming you are correct and they are, then they are
> in fact more robust so reality trumps theory.
>
> 3-500z with 20 w. grid dissipation is a tube you pretty much have to
> deliberately damage, in order to damage it.
> I don't know how often unobtainium FETs show up at flea markets but
> you can often find tubes out of production--3-1000z, 4-1000...sure
> they may not be cheap but at least they are there.  Most of the amps I
> have seen with tubes that become unobtainium were goofy one-offs that
> should have never been made.  Stick to buying an amp that uses a tube
> that is also used in amps made by a number of other manufacturers and
> you'll probably never be hung out to dry.
>
>> Given proper design and protection, modern solid state devices will
>> last a lifetime unlike tubes that *will* need to be replaced due to
>> filament/cathode aging.  Transistor amplifiers don't suffer from
>> catastrophic arcing and certainly don't represent the electrocution
>> danger of tube amplifiers.
> Dangers only to hams who don't know what they are doing.  I guess it
> is easier to make a s.s. amp appliance operator idiot proof but making
> one as bullet proof as a tube amp costs a fortune.  The Dishtronix
> amp, about the only s.s. HF amp I have seen that comes close to being
> on a par with a 1.5 kw tube amp in a number of ways is around $10,000.
>
> 73
> Rob
> K5UJ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>