Amps
[Top] [All Lists]

Re: [Amps] The power of an oversized electrolytic capacitor /

To: <amps@contesting.com>
Subject: Re: [Amps] The power of an oversized electrolytic capacitor /
From: "Peter Voelpel" <df3kv@t-online.de>
Date: Mon, 21 May 2012 16:31:15 +0200
List-post: <amps@contesting.com">mailto:amps@contesting.com>
My result on a 3-phase power supply with a 3800V AC transformer is a drop to
5162V from 5400VDC at 2.4A load.
The capacitor is just 2µF, no choke input in this one.
That capacitor does the same as a 12µF would do on a single phase power
supply. 
I don´t care about the additional 100W I could probably obtain by a larger
capacitor and have no voltage drop across a large glitch resistor.

73
Peter, DJ7WW

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Jim Thomson

## Ok, here is how I do it..for the same 5400 vdc NO load B+ supply. I use
a 3818 vac sec xfmr, plus a FWB, and a string of 16 x 2500uf @ 450 vdc caps.

Each cap weighs just 14 oz. Thats a total weight of 224 oz for the caps = 7
lbs. Thats also a total of 156 uf. Ripple is zero. Both static and dynamic
regulation are superb, and second to none. A single 100k @ 3watt mof across
each cap. Total diss = 18 watts for the 16 x eq resistors... and NOT 300W.
In
both cases I just quoted, we are using a single phase, 60 hz plate xfmr. We
are NOT using a 3 phase plate xfmr, with the typ 208-360-480-600 vac input.


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>