Gentlemen,
I would not worry too much about the lack of specs; they would be quite
predictable and probable mediocre in respect of IMD performance.
All that really counts is that users of the Expert 1K or 2K amp do not cause
a nuisance to other adjacent users of the band in terms of IM crud and
buckshot and the SSB signal is not too wide in frequency occupancy; if any
amp meets that key criteria, then it is good enough for ham use.
The ones that I've heard on air meet this criterion.
Leigh
VK5KLT
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Jim Thomson
Sent: Tuesday, 5 March 2013 2:35 AM
To: amps@contesting.com
Subject: [Amps] Expert 2K
Interesting in that they list even less specs than the Icom.
Carl
KM1H
----- Original Message -----
From: "Paul Baldock" <paul@paulbaldock.com>
To: "Jim Thomson" <jim.thom@telus.net>; <amps@contesting.com>
Sent: Thursday, February 28, 2013 12:38 PM
Subject: Re: [Amps] 813 efficiency
> Checkout the Expert 2K. Full legal limit even on 6M. A piece of beauty to
> behold.
>
> http://www.expertampsusa.com/ExpertAmps2K.pdf
>
> - Paul KW7Y
## I was sure that array solutions sold these amps... but not listed.
How much do these amps cost ?
## Being made in italy, I would be leery of buying into a gong show,
if problems arose, or warranty work had to be done..or if parts not
available years down the road.....or if they went outa business. .
## I see no IMD specs. What is the imd3 and imd5 ?
later... Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|