Amps
[Top] [All Lists]

Re: [Amps] Transformer choice

To: Carl <km1h@jeremy.mv.com>
Subject: Re: [Amps] Transformer choice
From: "Ulf (SM0NOR)" <ulf@sm0nor.com>
Date: Mon, 4 Mar 2013 23:34:53 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I actually think the quote was for class 105, which is 40 ambient+55 rise+10 
hot spot.


Sent from a wireless device of an unrevealed brand.

On 4 mar 2013, at 21:57, "Carl" <km1h@jeremy.mv.com> wrote:

> A 105C rise is not what I consider a good transformer, ask what the 
> magnetizing current is.
> 
> Carl
> KM1H
> 
> 
> ----- Original Message ----- From: "Ulf (SM0NOR)" <ulf@sm0nor.com>
> To: <amps@contesting.com>
> Sent: Monday, March 04, 2013 6:28 AM
> Subject: [Amps] Transformer choice
> 
> 
> Hi Guys,
> I'm looking for some feedback on two transformer offers I have. I'm intending 
> to build a table top amp, so I'm accepting some compromises regarding the 
> transformer. I have made inquiries to a couple of winders and I have boiled 
> them down to 2 offers. I was asking for 2000 Volts @1A =2000VA (+ G1 and G2 
> windings). I'm targeting to get 2200-2400 watts output in PEP service and 
> about 1K in continuos service.
> 
> Both companies claim 2000VA but at different core weights
> 
> Company A:
> 17 Kilo toroid,  D=200 mm, H=110. About 3% voltage drop at full load. Max 
> temp rise = 105C over 40C ambient. DC resistance, about 25 ohms.
> Price: €480
> 
> Company B:
> 11 kilo toroid, D=180 mm, H=85mm. About 2,5% voltage drop at full load. 
> Can't, or don't want to specify other data.
> Price: €195
> 
> So what are your reflections? The A is obviously a the better choice. They 
> are serious and they offer detailed specs, exact delivery times etc. But all 
> comes at a premium price. Company B is smaller and they obviously compromises 
> with their specifications, but the price is a lot lower and so is the weight.
> 
> Now, I don't expect the cheaper and smaller core to do wonders. The bigger 
> one will for sure be more rugged and closer to "true 2000VA", especially if I 
> run it in true continuous mode. I'm inclined to go for the the bigger one, 
> because I want the best. But OTOH, I don't want to waste money because of a 
> "feeling". Perhaps the smaller one will be enough given the table-top 
> size/PEP service I'm targeting? After all, it matches what's inside most 
> commercial amps in this category.
> 
> I'm happy for any feedback...
> 
> 
> 
> 73's
> 
> Ulf (SM0NOR)
> ulf@sm0nor.com
> 
> 
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1430 / Virus Database: 2641/5647 - Release Date: 03/04/13
> 
> 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>