You might consider the ACOM 2000A. I have been using one remotely for
many years without a problem. This amp does have a temperature sensor
on each tube as well as many other parameters that are available to
monitor remotely.
- Paul KW7Y
At 07:20 PM 5/8/2013, Jerry wrote:
I have an Alpha 87a 'remoted' but in the shack, nevertheless I have not
touched any switch on the Alpha in 5 years and do everything by PC software
and it works great. Maybe the only thing I would add if I had it truly
remote would be a temp sensor over one of the 3CX800A7 vents to make sure
the air circulation never became compromised without me knowing about it
quickly.
73 Jerry
K1JOS
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Michael Tope
Sent: Wednesday, May 08, 2013 21:45
To: amps@contesting.com
Subject: [Amps] Alpha 87A in Remote Station Service
I am in the process of trying to set up a remotely controlled HF station. I
am looking at amplifiers selection and was wondering if anyone out there has
had experience they could share about using the Alpha 87A at a remotely
controlled station? I am wondering if it is a good choice for this sort of
application. Thanks!
73, Mike W4EF.............
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|