Amps
[Top] [All Lists]

[Amps] Amp Supply LK-500ZBx or generic P/S capacitor Question

To: <amps@contesting.com>
Subject: [Amps] Amp Supply LK-500ZBx or generic P/S capacitor Question
From: "KB8NTY" <kb8nty@wowway.com>
Date: Tue, 8 Jul 2014 14:24:57 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Appreciate all the help this group provides.

I have a nice clean unmodified LK-500ZBx (not sure what the x means), an early
serial number 500x,  the all gray front not the colorful
version.
P.Dahl transformers, QSK option, no ALO, step start, or fan speed option.
Original 8438 code Eimacs, producing 1400 out on best band.

As an admitted somewhat novice in the amp theory I look to the group for valued help
/ advice.

H/V seems to read 2900 +/- Idle, 2500 key down,  but more concerning is the
steady "buzzing"
coming from the P/S board (not the transformers) when powered on and when
keying
amp as well.
In the thoughts to save a impeding disaster a P/S replacement is in order.

I am a recovering leukemia patent, disabled, and recovering from both L&R
shoulder reconstructive surgeries from a fall after being discharged home
from long hospital stay.
Not complaining, I am blessed to be here and appreciate every day!

So not being up to repair/replace the original board, or ship out for
upgrade, I plan to purchase the PM-800 P/S from Harbach:
http://harbachelectronics.com/shop/amp-supply/pm-800-replacement-power-supply-module/

My question..I also see he offers a capacitor:
http://harbachelectronics.com/shop/misc/cp-210-set-of-eight-8-220-%ce%bcf-450vdc-filter-capacitors-with-sems-screws/
Similar to the original's in my LK-500ZB, these are physically larger than
the modern caps supplied with the PM-800 kit.

Any thoughts or opinions regarding the newer smaller modern caps compared to
the older larger caps?
His smaller caps are 105 deg hi-temp rated, which is good. So considering with
the values being close to the same 210/220 mfd, any reason to not go with
the smaller modern size?

Of-course the PM-800 board will be much easier for me to deal with and all
components & new board are all supplied, based on vintage the complete P/S
component replacement should be a good thing!...However if there is
compromise by use of the smaller size caps compared to the original larger
types, I will have to step back and re-evaluate my purchase plan.

I'm overthinking but if the smaller size, modern caps are equal or better, has me overthinking then why dont present day tube amps such as ameritron use the smaller caps?

Thank you very much for your thoughts and experience. I value your contribution.

-73- Ross KB8NTY

RossRadio: RF Ground Radial Website
http://www.rossradio.net/

Ground Radial Discussion: Please Visit & Join In!
https://groups.yahoo.com/neo/groups/groundradial/conversations/messages

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>