Amps
[Top] [All Lists]

[Amps] Henry amplifier transformer id

To: "amps@contesting.com" <amps@contesting.com>
Subject: [Amps] Henry amplifier transformer id
From: David Lisney <g0fvt@hotmail.com>
Date: Thu, 2 Jul 2015 20:48:47 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi, the Radiodan website lists it as 3200v 800mA, judging by the other 
transformers listed this is the HT rating when rectified etc, not the RMS 
voltage.
Regards David G0FVT

Sent from my iPad

> On 2 Jul 2015, at 17:00, amps-request@contesting.com wrote:
> 
> Send Amps mailing list submissions to
>    amps@contesting.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://lists.contesting.com/mailman/listinfo/amps
> or, via email, send a message with subject or body 'help' to
>    amps-request@contesting.com
> 
> You can reach the person managing the list at
>    amps-owner@contesting.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Amps digest..."
> 
> 
> Today's Topics:
> 
>   1. Henry amplifier transformer id (mikflathead@aol.com)
>   2. Re: Henry amplifier transformer id (Glen Zook)
>   3. Re: Henry amplifier transformer id (Chris Wilson)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Wed, 1 Jul 2015 19:37:24 -0400
> From: mikflathead@aol.com
> To: Amps@contesting.com
> Subject: [Amps] Henry amplifier transformer id
> Message-ID: <14e4bfb66f8-379a-30b9d@webprd-a34.mail.aol.com>
> Content-Type: text/plain; charset=utf-8
> 
> I just purchased 3 Henry rack cabinets with the high voltage power supplies. 
> The ECA transformer number is 1028. This powered a 3CX3000 tube. Can anyone 
> ID the transformer? Voltage and current and primary taps. Thanks Mike
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Thu, 2 Jul 2015 01:47:39 +0000 (UTC)
> From: Glen Zook <gzook@yahoo.com>
> To: "mikflathead@aol.com" <mikflathead@aol.com>,
>    "Amps@contesting.com" <Amps@contesting.com>
> Subject: Re: [Amps] Henry amplifier transformer id
> Message-ID:
>    <165282598.825135.1435801659824.JavaMail.yahoo@mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
> 
> I also have a 1028 transformer. ?It was used in the Henry 2000D r.f. 
> generator. ?From what I have found out about the transformer is that the 
> power supply was rated at 3200-volts @ between 800 mA and 1 ampere.
> The 3000-watt r.f. generator actually used 2-each of the 1028 transformers in 
> the power supply (model 3000D) whereas the 2000D only used a single 1028.
> This per the partial manual copy that I have on the Henry "D" series r.f. 
> generators.?Glen, K9STH
> 
> Website: http://k9sth.net
>      From: mike via Amps <amps@contesting.com>
> To: Amps@contesting.com 
> Sent: Wednesday, July 1, 2015 6:37 PM
> Subject: [Amps] Henry amplifier transformer id
> 
> I just purchased 3 Henry rack cabinets with the high voltage power supplies. 
> The ECA transformer number is 1028. This powered a 3CX3000 tube. Can anyone 
> ID the transformer? Voltage and current and primary taps. Thanks Mike
> 
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Thu, 2 Jul 2015 07:41:02 +0100
> From: Chris Wilson <chris@chriswilson.tv>
> To: mike via Amps <mikflathead@aol.com>, amps@contesting.com
> Subject: Re: [Amps] Henry amplifier transformer id
> Message-ID: <1653601582.20150702074102@chriswilson.tv>
> Content-Type: text/plain; charset=us-ascii
> 
> 
> 
> Hello Mike,
> 
>> On Thursday, July 2, 2015,  you wrote:
>> 
>> I just purchased 3 Henry rack cabinets with the high voltage power
>> supplies. The ECA transformer number is 1028. This powered a 3CX3000
>> tube. Can anyone ID the transformer? Voltage and current and primary taps. 
>> Thanks Mike
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
> 
> 
>   I have the 2000D manual in .pdf format and will e-mail it to you.
>   I  bought  a  2000D in 3 phase format, with all the wiring chopped,
>   and  converted  it  to  a  big  single phase HV supply. Henry Radio
>   themselves  are still around and very helpful, but the manual shows
>   the taps for normal mains voltage input.
> 
> 
> 
> -- 
> Best regards,
> Chris                            mailto:chris@chriswilson.tv
> 
> 
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 
> ------------------------------
> 
> End of Amps Digest, Vol 151, Issue 1
> ************************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>