To: | Amps group <amps@contesting.com> |
---|---|
Subject: | [Amps] TenTec Centurion 422 Amp T/R Relay problem |
From: | joeduerbusch <k0bx@arrl.net> |
Date: | Tue, 13 Dec 2016 01:38:28 +0000 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
I think the T/R relay is bad or damage. In receive the signal from the antenna passes through to the rig, But if I key the amp, there is no output. It shows a high SWR. My question to any 422 amp owners is: How do I remove the 81545 relay board from the amp? How do I "Test" the relay? How can I find a replacement relay? TT is no longer supplying parts or repairs on the 422 amp. Joe K0BX #1 Honor Roll Mixed Honor Roll Phone Honor Roll CW Honor Roll RTTY Honor Roll 20 Meters 5BDXCC Plus 30,17,12 5BWAS _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] MOSFET amp filtering - was: auto-tune, Jim Brown |
---|---|
Next by Date: | Re: [Amps] MOSFET amp filtering - was: auto-tune, Jeff AC0C |
Previous by Thread: | [Amps] TL922 efficiency, Vic Rosenthal 4X6GP |
Next by Thread: | Re: [Amps] Vertical Ant & Ground Loss [WAS: MOSFET amp filtering now soil], Catherine James |
Indexes: | [Date] [Thread] [Top] [All Lists] |