Hi Jim, yes that is exactly what they had.
They worked perfectly in every situation I
used them in. It was a nice efficient
board and did exactly as promised.
73,
Gary
KA1J
> Date: Mon, 12 Jun 2017 00:38:47 -0400
> From: "Gary Smith" <Gary@ka1j.com>
> To: amps@contesting.com
> Subject: Re: [Amps] Ten-Tec Titan 10 Meter Input SWR
>
> <I really appreciated the Amp Supply tuned
> input I put in the 4-1000A amp I made back
> in the 90's. It was pure simplicity and
> worked so well. I put one in a SB-220 as
> well with the same wonderful results.
>
> 73,
>
> Gary
> KA1J
>
> ## I believe the amp supply tuned input board used arco compression
> caps for both C1 + C2..and a fixed torroid for the coil. The arco
> compression caps were padded on 160m. I think the biggest arco I have
> is aprx 1600 pf. They ranged from 200 pf up to aprx 1600 pf. Arcos
> have a limited min-max range, which is still ample for any tuned
> input. Typ would be like 200-500 pf etc.
>
> ## It was ideal for folks with HB amps, and anything else. Just
> ## tweak both caps
> for flat swr, then repeat for each band.
>
> Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|