Hi Folks,
I think I have the pin outs correctly. I know there is a low output
voltage on the K3. I don't know why the AMP does not like the K3. I have
the AMP set for Yaesu. That is basically what the band data is for the
K3/Yaesu. I would love some tips, tricks, help, and etc...
Here is what I know:
K3 DB15 = THP HL2.5
Ground 5/12 = 5
Data 0/A 13 = 3
Data 1/B 3 = 11
Data 2/C 9 = 4
Data 3/D 14 = 12
IF you can point me in the right direction, I would appreciate it.
Will WC2L
--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz
wc2l@wc2l.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|