[Amps] AL-80A - Pi/Pi-L Switch Wafer Failure due to arcing, Bill Coleman, 2018/07/27

• Re: [Amps] AL-80A - Pi/Pi-L Switch Wafer Failure due to arcing, Victor Rosenthal 4X6GP, 2018/07/27
  • Re: [Amps] AL-80A - Pi/Pi-L Switch Wafer Failure due to arcing, Kim Elmore, 2018/07/29
• Re: [Amps] AL-80A - Pi/Pi-L Switch Wafer Failure due to arcing, Carl, 2018/07/29
• Re: [Amps] AL-80A - Pi/Pi-L Switch Wafer Failure due to arcing, Jim, 2018/07/29

[Amps] Equalising the air flow on Commander 2500 tubes/replacement neoprene chimneys, Steve Ireland, 2018/07/27

• Re: [Amps] Equalising the air flow on Commander 2500 tubes/replacement neoprene chimneys, Jay Sturtevant, 2018/07/27
  • Re: [Amps] Equalising the air flow on Commander 2500 tubes/replacement neoprene chimneys, Steve Ireland, 2018/07/27
    • Re: [Amps] Equalising the air flow on Commander 2500 tubes/replacement neoprene chimneys, Bill Turner, 2018/07/29
  • Re: [Amps] Equalising the air flow on Commander 2500 tubes/replacement neoprene chimneys, mike via Amps, 2018/07/29
  • Re: [Amps] Equalising the air flow on Commander 2500 tubes/replacement neoprene chimneys, Carl, 2018/07/29
• [Amps] Equalising the air flow on Commander 2500 tubes/replacement neoprene chimneys, Steve Ireland, 2018/07/27

Re: [Amps] MOSFET amp for 80 m, Manfred Mornhinweg, 2018/07/20

• Re: [Amps] MOSFET amp for 80 m, Angel Vilaseca, 2018/07/21
• Re: [Amps] MOSFET amp for 80 m, Manfred Mornhinweg, 2018/07/24
  • Re: [Amps] MOSFET amp for 80 m, Angel Vilaseca, 2018/07/27

[Amps] 220 / 240 Volt filament transformer for 3CX3000 wanted, Chris Wilson, 2018/07/18

• Re: [Amps] 220 / 240 Volt filament transformer for 3CX3000 wanted, Chris Wilson, 2018/07/21
• [Amps] 220 / 240 Volt filament transformer for 3CX3000 wanted, Jim Thomson, 2018/07/21

[Amps] WD7S Silent Key, James Colville, 2018/07/18

• Re: [Amps] WD7S Silent Key, Conrad PA5Y, 2018/07/18
• [Amps] Blue glow in a 3-500Z, Paul Baldock, 2018/07/25
  • Re: [Amps] Blue glow in a 3-500Z, MU 4CX250B, 2018/07/27
  • Re: [Amps] Blue glow in a 3-500Z, Jim, 2018/07/27
• Re: [Amps] WD7S Silent Key, Jeff Pederson via Amps, 2018/07/20

[Amps] 8877 negative grid current, Conrad PA5Y, 2018/07/15

• Re: [Amps] 8877 negative grid current, MU 4CX250B, 2018/07/16
• [Amps] FW: 8877 negative grid current, Matt, 2018/07/16

[Amps] parasitic suppressor for six meters, Jim Garland, 2018/07/15

• Re: [Amps] parasitic suppressor for six meters, Bill Turner, 2018/07/16
  • Re: [Amps] parasitic suppressor for six meters, Ron Youvan, 2018/07/18
• Message not available
  • Re: [Amps] parasitic suppressor for six meters... and more, Jim Garland, 2018/07/24
• [Amps] parasitic suppressor for six meters, Jim Thomson, 2018/07/16
  • [Amps] MOSFET amp for 80 m, Angel Vilaseca, 2018/07/18
    • Re: [Amps] MOSFET amp for 80 m, Roger Graves, 2018/07/20
    • Re: [Amps] MOSFET amp for 80 m, Bill Turner, 2018/07/20

[Amps] Titan 425 keying issues, martin dulaney, 2018/07/15

• Re: [Amps] Titan 425 keying issues, Jim Brown, 2018/07/16
  • Re: [Amps] Titan 425 keying issues, Bill Turner, 2018/07/18

[Amps] Ten-Tec Centurion Mod. 422 Tubes Look Biased on at Turn on, n7wbjohn, 2018/07/11

• Re: [Amps] Ten-Tec Centurion Mod. 422 Tubes Look Biased on at Turn on, Roy Koeppe, 2018/07/15
• [Amps] 8877 on 144MHz negative grid current., Conrad PA5Y, 2018/07/15
  • Re: [Amps] 8877 on 144MHz negative grid current., Bill Turner, 2018/07/16
• Re: [Amps] Ten-Tec Centurion Mod. 422 Tubes Look Biased on at Turn on, James Colville, 2018/07/18

[Amps] 6 Meter Pi net and Tuned Input Calculator, Jim W7RY, 2018/07/11

• Re: [Amps] 6 Meter Pi net and Tuned Input Calculator, Jim W7RY, 2018/07/11
• Re: [Amps] 6 Meter Pi net and Tuned Input Calculator, Bill Turner, 2018/07/15
• [Amps] 6 Meter Pi net and Tuned Input Calculator, Jim Thomson, 2018/07/15
  • Re: [Amps] 6 Meter Pi net and Tuned Input Calculator, donroden, 2018/07/16

[Amps] Lube for roller inductor, Roger, 2018/07/07

• Re: [Amps] Lube for roller inductor, Bert, 2018/07/11

[Amps] Use Caution when using Silicon Dielectric Greases, Roger (K8RI), 2018/07/06

• Re: [Amps] Use Caution when using Silicon Dielectric Greases, Greg Wasik, 2018/07/07
  • Re: [Amps] Use Caution when using Silicon Dielectric Greases, Roger (K8RI), 2018/07/07
• [Amps] Use Caution when using Silicon Dielectric Greases, Jim Thomson, 2018/07/07
  • Re: [Amps] Use Caution when using Silicon Dielectric Greases, Roger (K8RI), 2018/07/11
    • [Amps] Dielectric Greases, donroden, 2018/07/15
• [Amps] Use Caution when using Silicon Dielectric Greases, Jim Thomson, 2018/07/15

[Amps] Dielectric grease for roller inductors ?, Jim Thomson, 2018/07/05

• Re: [Amps] Dielectric grease for roller inductors ?, Joe, 2018/07/06
  • Re: [Amps] Dielectric grease for roller inductors ?, Bob Burns W9BU, 2018/07/11
    • Re: [Amps] Dielectric grease for roller inductors ?, Roger (K8RI), 2018/07/15

Re: [Amps] Amps Digest, Vol 186, Issue 9, Carl, 2018/07/02

• [Amps] Alpha 87a No RS-232, Gerry Hull, 2018/07/03
  • Message not available
    • Re: [Amps] Alpha 87a No RS-232, Gerry Hull, 2018/07/04
    • Re: [Amps] Alpha 87a No RS-232, Jerry O. Stern, 2018/07/05
  • Re: [Amps] Alpha 87a No RS-232, Billy Mac, 2018/07/04
    • Re: [Amps] Alpha 87a No RS-232, Mike, 2018/07/05
    • Re: [Amps] Alpha 87a No RS-232, Gerry Hull, 2018/07/05
  • Re: [Amps] Alpha 87a No RS-232, Roger (K8RI), 2018/07/05
  • Re: [Amps] Alpha 87a No RS-232, Dick Green WC1M, 2018/07/05
    • Re: [Amps] Alpha 87a No RS-232, Mark Bitterlich, 2018/07/06
    • Re: [Amps] Alpha 87a No RS-232, Gerry Hull, 2018/07/06
    • Re: [Amps] Alpha 87a No RS-232, Mark Bitterlich, 2018/07/06
    • Re: [Amps] Alpha 87a No RS-232, Paul Christensen, 2018/07/07
    • Re: [Amps] Alpha 87a No RS-232, Gerry Hull, 2018/07/11
• [Amps] FOR SALE : Drake L-4B on Steroids., Paul Baldock, 2018/07/03