[Top] [All Lists]

[Amps] K3 & THP HL-2.5KFX

Subject: [Amps] K3 & THP HL-2.5KFX
From: William Liporace <>
Date: Wed, 25 Jul 2018 19:37:39 -0400
List-post: <>
Hi Folks,
I think I have the pin outs correctly. I know there is a low output voltage on the K3. I don't know why the AMP does not like the K3. I have the AMP set for Yaesu. That is basically what the band data is for the K3/Yaesu. I would love some tips, tricks, help, and etc...

Here is what I know:

        K3 DB15  = THP HL2.5
Ground    5/12   = 5
Data 0/A  13     = 3
Data 1/B  3      = 11
Data 2/C  9      = 4
Data 3/D  14     = 12

IF you can point me in the right direction, I would appreciate it.

Will WC2L

William Liporace WC2L or
AR-Cluster Node  telnet or 144.93 MHz

Amps mailing list
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] K3 & THP HL-2.5KFX, William Liporace <=