Just forget I said anything. I thought I could contribute something that
helped me and just forget it. I'll just listen from the background and
absorb all the wisdom. 73.
On Mon, Feb 3, 2020 at 3:15 PM <john@kk9a.com> wrote:
> Unfortunately a station ground does not magically absorb unwanted RF.
> I do not even have a ground rod connected to my transceiver. I am not
> sure why one amplifier would cause RFI and another one would not
> unless the output was significantly different. The output power was
> not mentioned in the original post. I would definitely use a quality
> feedline and chokes at the antenna to minimize RF current on this
> feedline.
>
> John KK9A
>
>
> John Bodine john.bodine at gmail.com
>
> Drive a ground rod close to your operating position and connect to it. Your
> problems will be cured.
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--
Later,
John Bodine/WU2E
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|