In order to do power on/off you need the optional RPON module from ACOM. If
you have that then you can turn the amp on and off remotely.
A bug in the amp, I think, prevents you from clearing the PROT light
remotely, so if you get a fault that will keep blinking even when the amp is
working again.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: telnet://k1ttt.net:7373
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Robert
Sent: Monday, August 03, 2020 02:54
To: amps@contesting.com
Subject: [Amps] ACOM Director software
The ACOM 2000 has RS232 port on back
Control software program is available from M0YOM
Anyone have experience with this method?
can it do remote on/off - aka from other side of router via internet?
Thanks
W5AJ
Robert
Midland, Texas
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|