Unfortunately this explorative initiative here is skewed entirely towards the
mainstream audiophile tube market…sadly not the ham radio transmitting tube
market for 3-500Z, 572B, 811A, 3CX800A7, 3CX1500A7/ 8877, 4CX1000A, 4CX1500B,
etc ☹
Reconstituting the tooling, materials, and knowhow to produce these Tx tubes to
the former Eimac quality standard would be an overreaching bridge too far….
Leigh
VK5KLT / VK5LT
-----Original Message-----
From: Amps <amps-bounces@contesting.com> On Behalf Of Gary
Sent: Wednesday, 23 March 2022 9:01 AM
To: Amps group <amps@contesting.com>
Subject: [Amps] Western Electric
In case someone hasn't seen this. Western Electric is looking to get back into
the domestic tube market, and they are looking into what tubes to produce. You
can see more and make suggestions here:
<https://www.westernelectric.com/expand> https://www.westernelectric.com/expand
73,
Joe kk0sd
_______________________________________________
Amps mailing list
<mailto:Amps@contesting.com> Amps@contesting.com
<http://lists.contesting.com/mailman/listinfo/amps>
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|