Yes Alek such an announcement of the modern day reintroduction of these
venerable US made Tx tubes would only occur in our dreams..... ☹
And Yes Mike, a 3-1000Z would be the icing on the cake!
73
Leigh
VK5KLT / VK5LT
-----Original Message-----
From: Amps <amps-bounces@contesting.com> On Behalf Of Alek Petkovic
Sent: Wednesday, 23 March 2022 9:52 AM
To: amps@contesting.com
Subject: Re: [Amps] Western Electric
Summed it up beautifully there Leigh.
I clicked the link and my heart sank in the same way.
The reason, of course, is that the audio people seem to love the idea of paying
premium prices, whereas we hams have a different mindset.
73, Alek, VK6APK
On 23/03/2022 7:08 am, Leigh Turner wrote:
> Unfortunately this explorative initiative here is skewed entirely
> towards the mainstream audiophile tube market…sadly not the ham radio
> transmitting tube market for 3-500Z, 572B, 811A, 3CX800A7, 3CX1500A7/
> 8877, 4CX1000A, 4CX1500B, etc ☹
>
> Reconstituting the tooling, materials, and knowhow to produce these Tx tubes
> to the former Eimac quality standard would be an overreaching bridge too far….
>
> Leigh
>
> VK5KLT / VK5LT
>
>
> -----Original Message-----
> From: Amps <amps-bounces@contesting.com> On Behalf Of Gary
> Sent: Wednesday, 23 March 2022 9:01 AM
> To: Amps group <amps@contesting.com>
> Subject: [Amps] Western Electric
>
> In case someone hasn't seen this. Western Electric is looking to get back
> into the domestic tube market, and they are looking into what tubes to
> produce. You can see more and make suggestions here:
>
> <https://www.westernelectric.com/expand>
> https://www.westernelectric.com/expand
>
> 73,
>
> Joe kk0sd
>
> _______________________________________________
>
> Amps mailing list
>
> <mailto:Amps@contesting.com> Amps@contesting.com
>
> <http://lists.contesting.com/mailman/listinfo/amps>
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|