Thank you!!
I would be very thankful to be able to purchase one of your boards from you
for my Command HF2500!
Please let me know how to proceed. I will get a check to you immediately or
use another pay mennt method.
Pat made a great amp!!
THANK YOU!
JAY, K2ZT
On Fri, Jan 19, 2024, 8:10 AM gudguyham--- via Amps <amps@contesting.com>
wrote:
> Recently I had occasion to have to rebuild THREE power supply units (
> located under the chassis) of the Commander line of amps. Two HF2500’s and
> one VHF2000. Both use the same power supply board. Unfortunately all 3
> boards were damaged by heat and the traces flaked off the boards in many
> spots. The traces that didn’t lift normally did when tried to unsolder and
> resolder new parts. The old boards are basically unsalvageable to
> rebuild. The boards are obviously old technology. They are a one time
> board as far as I’m concerned! As usual confronted with the need, I’ve
> developed a brand new board using new technology on boards with masking
> etc. I need these boards to professionally rebuild the power supplies in
> these amps. I don’t trust Gerry rigging these old decrepit boards. The
> whole amplifier RF deck must be removed from the amp chassis to get to the
> power supply. You don’t want to go back on after using band-aid methods
> on the old boards. These amps are terrific amps and can go another 35
> years with the breath of life from an all new board. Hopefully within the
> next month I will have these boards ready. I ordered extra for my supply
> for further repairs and for those who would like to attempt their own
> replacement I will have a limited supply I’ll be offering them fully
> assembled and ready to install The price is unknown at the moment until I
> can fully asses the expenditure. If interested I’ll take orders on a FCFS
> basis. I’m going to be installing one in my own personal amp as well. I
> have my own transformer for testing so if you don’t feel confident in doing
> the replacement yourself I only need the RF deck and can do it here. It’s
> a shame to see these good old amps sidelined for lack of parts. Thanks for
> reading Lou
>
>
> Sent from the all new AOL app for iOS
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|