FWIW
I used Sat TV Cable (RG6 I think) here in the UK.
Works a treat for QRO and quarter wave lines on a 40m 4 Square.
Home brew switching box as well.
73
Adrian MW1LCR / GW9X
On 26/08/2013 02:20, TOM T wrote:
I don't feel qualified to answer your question. If you are not making
progress you can write to my son KZ7Z. I don't fool around with coax
often. I use 600 ohm open wire line with a current 4:1 baulin and good
ant tuner. I can use the whole band and use the ant on other bands.
TOM
KZ7ZZ
----- Original Message ----- From: "Joe Blackwell" <aa4nn@earthlink.net>
To: <antennaware@contesting.com>
Sent: Sunday, August 25, 2013 4:02 PM
Subject: Re: [Antennaware] 3/8 wv spacing 40 meter 4 square
Just make sure for 50ohm the .66 velocity factor
leaves you enough cable to reach the antennas from
the control box.
de Joe aa4nn
On 8/22/2013 8:09 PM, [1]k8leewmm@aol.com wrote:
should I use 50 ohm or 75 and how long? 3/4 wv phasing lines? Found
an old in
fo sheet showing adding 1/2 50ohm coax to existing 1/4 75 ohm??
Wayne k8lee
_______________________________________________
Antennaware mailing list
[2]Antennaware@contesting.com
[3]http://lists.contesting.com/mailman/listinfo/antennaware
--
References
1. mailto:k8leewmm@aol.com
2. mailto:Antennaware@contesting.com
3. http://lists.contesting.com/mailman/listinfo/antennaware
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
|