CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] station tables

To: "W0MU Mike Fatchett" <w0mu@w0mu.com>, "'K1TTT'" <K1TTT@ARRL.NET>,<cq-contest@contesting.com>
Subject: Re: [CQ-Contest] station tables
From: "Alan Zack" <k7acz@cox.net>
Reply-to: Alan Zack <k7acz@cox.net>
Date: Thu, 5 Apr 2007 17:52:47 -0700
List-post: <mailto:cq-contest@contesting.com>
A door supported by 2 file cabinets makes a nice operating table.  You can 
get oak, walnut, or maple file cabinets to make it look more pleasing.
______________________________________
Alan Zack
Amateur Radio Station K7ACZ
Official USCG Auxiliary Comm Station
Las Vegas, Nevada, USA
Delta Rocket Quality Engineer, The Boeing Company, Retired
Aviation Chief Warrant Officer,  U.S. Coast Guard, Retired

----- Original Message ----- 
From: "W0MU Mike Fatchett" <w0mu@w0mu.com>
To: "'K1TTT'" <K1TTT@ARRL.NET>; <cq-contest@contesting.com>
Sent: Wednesday, April 04, 2007 9:15 PM
Subject: Re: [CQ-Contest] station tables


>I could not find reasonably priced tables at office stores.  I ended up
> buying a couple of stout "kitchen" tables from a local furniture store. 
> The
> table is wider than most office desks.  I did find some conference tables
> that would have worked but they would have had to be ordered online.
>
> Mike W0MU
>
> -----Original Message-----
> From: cq-contest-bounces@contesting.com
> [mailto:cq-contest-bounces@contesting.com] On Behalf Of K1TTT
> Sent: Wednesday, April 04, 2007 4:17 PM
> To: YCCC; reflector cq-contest
> Subject: [CQ-Contest] station tables
>
> I am considering replacing the home made station tables here with 
> something
> commercial.  Does anyone have a good source, model numbers, etc, for 
> tables
> that would be good for single band or so2r.
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>


_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>