CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Multi 2 locking device?

To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Multi 2 locking device?
From: Kostas SV1DPI <sv1dpi@otenet.gr>
Date: Fri, 6 Jan 2017 08:22:23 +0200
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Also there no LP category. Only HP, so M2 is not a wise decision.

I know 3 devices:

1) 4o3a

http://www.4o3a.com/index.php/products/station-automation/lock-x/

and for inband use

http://www.4o3a.com/index.php/products/antenna-switchers/1-amp-2-radio-switch/

2) ea4tx

http://ea4tx.com/en/ea4tx-interlock/

3) Acom

http://www.acom-bg.com/products/xcvr-commutator/acom-2s1-automatic-xcvr-commutator

Acom and 2nd 4o3a are for inband use. With Acom you can share the same antenna, with 4o3a you need 2 antennas (better but you need one more ant).

...73 de Kostas SV1DPI
  (One of SZ1A-EP6T)

On 5/1/2017 8:34 μμ, Jukka Klemola wrote:
Oh .. and about operating on the same band..
You use LP.
If you have separate antennas for each radio, you should have no problems.

If you want to share the antennas, I do not know of any commercial products
for the use you describe.


73,
Jukka OH6LI


2017-01-05 20:31 GMT+02:00 Jukka Klemola <jpklemola@gmail.com>:

For M2, you do not need a PTT interlocking device if you use two radios.

If you use two radios per band, then you need a PTT interlock for those
two radios on each band.
If you use a third radio for 3rd band multipliers, you need an interlock.
This 3rd band interlock can be complex, depending on how you want to
operate.

But, for a M2 station with just two radios, one for a band at a time, you
do not need an interlock.


73,
Jukka OH6LI



2017-01-05 20:03 GMT+02:00 Fco. Luis Delgadillo <xe2b@outlook.com>:

Hola,

I'm planning to operate M2 LP, the oncoming contest season.
I do have two WX0B passbands filters from my previous SO2R setup.

-Only two radios will be used.
and
- Very simple antennas setup on a city lot:
Log periodic Cushcraft ASL-2020
Vertical tribander Force13 VR-3
Twin Slopper Alpha-delta DX-A

Is there any summary related to options available for locking devices to
prevent two radios to operate in the same band?  I do not want to have
burned front ends.
Preferably,  I would like to build it.

I appreciate the feedback

73

Luis XE2B


Enviado desde mi Huawei de Telcel
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest


_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
<Prev in Thread] Current Thread [Next in Thread>