Jim,
Thanks!!! I'm still learning CW (did the CWOPS academy course
this winter), but live in a very high noise area. I used to do lots of
contesting from my qth, that is no longer feasable with the high noise.
I do some remote ops, and travel to Vermont to operate some contests.
FT8 (and CW) allow me to make qso's from my home qth that would not be
possible otherwise.
The RTTY contesting I used to do from home is now just not possible to
do with the same results. I can not hear the stations I used to.
Some of us have switched to the FT8 and JT modes because that is the
only way we can work some DX stations.
Gordon - N1MGO (BAMBI on RTTY)
On 06/14/2018 05:12 AM, Jim Brown wrote:
On 6/13/2018 10:53 AM, Peter Sundberg wrote:
Who cares any more as FT8 is about computers talking to computers
while the operator is doing - or has his mind - on other things. Ham
Heaven is here according to the masses and apparently statistics. RBN
is all about computers anyway. And we must make decisions based on
statistics - right?
To be able to make use of the FT8 "Deep" functionality the computer
needs the info to decode unknown callsigns that are "22 dB below the
noise level".
The above quotes are deceptive half-truths. I must say that I'm
getting awfully tired of the bashing of fine operating modes developed
by K1JT and his team that requires a lot more operator sophistication
than those who have never used it assume. I'm a pretty good CW op
(starting in 1955), but I also concentrate on station building,
understanding propagation, and the other aspects that contribute to a
successful QSO. In the recent WPX CW contest, I was in the top 4 high
power single-op scores from the west coast (signing KU6W). Ragchewing
bores me to tears.
There are good reasons for the degree of automation that WSJT-X
provides for modes with short turnaround times. But a successful QSO
over a difficult path includes good antennas, good stations with good
radios, good feedlines, good switching, knowing where to point the
antenna, when to be working what distant QTH, knowing when propagation
can make it possible, picking an operating frequency within the
waterfall. My computer didn't make the QSO -- me, my radio, my
station, including my antennas made the QSO!
I mostly use WSJT modes for QSOs I can't make another way -- mostly 6M
and 160M, mostly E-skip, meteor scatter, and some tropo. About two
months ago, I managed a QSO with 5A1AL in Libya, who running barefoot
with a compromise antenna; my neighbor W6GJB and I had been chasing
him for three years. Libya is TOUGH from the west coast of the US. I
think we worked him on 17M or 20M.
I chase grids on 6M (only), and have found both JT65 and FT8 a huge
help. There are thousands of SSB ops living in rare grids who never
learned CW, but they can run FT8 and give me a QSO with 20 dB better
noise immunity than SSB!
And there's another HUGE issue -- most of us are surrounded by homes,
each of which, including our own, are filled with noise sources that
cover all but the strongest signals. K1JT's modes have given hams with
these limitations a chance to do ham radio.
I'm a genuine old fart, first licensed in 1955. I try to learn
something new every day, and in the spirit of ham radio, try to share
what I've learned with others. I suggest that the bashers adopt these
objectives.
73, Jim K9YC
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
--
Gordon - N1MGO
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|