Did you load comtsr1 with the right parameters before loading CT?
73 de Bob
n2xr
-----Original Message-----
From: 00tlzivney@bsuvc.bsu.edu <00tlzivney@bsuvc.bsu.edu>
To: ct-user@contesting.com <ct-user@contesting.com>
To: <ct-user@contesting.com>
Date: Friday, March 12, 1999 2:28 PM
Subject: [ct-user] CT939 does not turn my OR2800 rotor
>
>I got CT939 to load and work after disabling EMM386 in the config.sys
file..
>even tho it worked fine on 9.00, 9.10a, and 9.27 with EMM386 loaded....
>
>Anyway, now I can't get CT939 to turn my OR2800 rotor. The rotor turns
>fine when using a telecommunications package: 9600 baud, COM1.
>
>But, when I set the Communications Setup in CT939 to Com1, 9600, Rotor1
>and Rotor1 is set to OR2800, nothing happens!
>I type "30" in the callsign field, hit CTRL-F10, and watch the
>bottom of my screen print "Rotor 1 to 30 degrees" ... but NOTHING happens
>ever. After exiting CT, I can still turn my rotor using TELEX (my
>communications package).
>
>What am I missing now?
>
>Thanks.
>
>Terry Zivney, N4TZ/9
>00tlzivney@bsuvc.bsu.edu
>
>
>--
>Submissions: ct-user@contesting.com
>Administrative requests: ct-user-REQUEST@contesting.com
>WWW: http://www.contesting.com/ct/
>Questions: owner-ct-user@contesting.com
>
>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|