Hi Mark,
Are you looking for what station number goes with which .BIN file? If so, why
not just stick the
.BIN file on a computer loaded with CT/CT-win, fire up CT and point it to the
.BIN file in question.
The first screen that comes up gives you all the config information for that
station, including the
station number.
73, Ted W4NZ
-----Original Message-----
From: ct-user-bounces@contesting.com
[mailto:ct-user-bounces@contesting.com]On Behalf Of Jim Reisert AD1C
Sent: Monday, June 26, 2006 2:00 PM
To: Mark Bailey; ct-user@contesting.com
Subject: Re: [ct-user] Is the Station Number available in the CT Log
file or.BIN database?
--- Mark Bailey <kd4d@comcast.net> wrote:
> I am pulling together some Field Day log files from a large network.
> Some QSO's may have been logged on the wrong band. I know what
> "Station Number" on the network generated these QSO's. Is the
> station number available in the ".BIN" file or any of the products
> of it?
>
> If it is, I can check for this case and make any necessary
> corrections. Also, is the ".BIN" file format documented anywhere?
There is a C/C++ header file for the .BIN file format, I don't know if K1EA
ever made it public.
If you create a .RES file from the .BIN file, I think the station number will
be in one of the right-most fields. You can modify that field (carefully) and
then convert it back to .BIN.
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.us
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|