CT-User
[Top] [All Lists]

Re: [ct-user] (no subject)

To: <ct-user@contesting.com>
Subject: Re: [ct-user] (no subject)
From: "John Bednar" <k3ct@verizon.net>
Date: Thu, 09 Aug 2007 05:25:32 -0400
List-post: <mailto:ct-user@contesting.com>
Bob,

Did you try to change the address in Device Manager | LPT port
Properties | Resources? You have to uncheck "Use automatic
settings".

John
k3ct@verizon.net


-----Original Message-----
From: ct-user-bounces@contesting.com
[mailto:ct-user-bounces@contesting.com] On Behalf Of Bob
Schreibmaier
Sent: Wednesday, August 08, 2007 11:03 PM
To: ct-user@contesting.com
Subject: Re: [ct-user] (no subject)

I have not had a lot of success with USB to anything
adapters and CTWin.  This was on a Dell.  I put an
LPT port card into the Dell, which came up as LPT3.
I was able to change that to LPT1 but, unfortunately,
the I/O address was in the 0xDCF0 range and CTWin
had no idea how to deal with that.  I have been
unable to change the I/O address.

I would love to hear how to fix this, as a LOT of
new computers are coming out with only USB ports.

73,
Bob
K3PH

-- 
+----------------------------------------------+
| Bob Schreibmaier K3PH | E-mail: k3ph@ptd.net |
| Kresgeville, PA 18333 | http://www.dxis.org  |
+----------------------------------------------+

John Bednar wrote:
> Ed,
> 
> I have seen several reports that USB to LPT adapters do not work
for
> sending CW with CTWin.
> 
> John
> k3ct@verizon.net
> 
> 
> -----Original Message-----
> From: ct-user-bounces@contesting.com
> [mailto:ct-user-bounces@contesting.com] On Behalf Of Ed K1EP
> Sent: Wednesday, August 08, 2007 9:39 PM
> To: Bill Free; ct-user@contesting.com
> Subject: Re: [ct-user] (no subject)
> 
> CTWIN does not support serial CW, only parallel port CW.  So, if
you
> don't have a parallel port, you will have to get a USB to parallel
> adapter or a card to put in the computer.
> 
> At 8/8/2007 09:01 PM, Bill Free wrote:
>> I have a somewhat related question to the "how do I get storage
> from CT 
>> under XP?"
>>
>> My computer runs XP and I am using CTWIN.  However, there are no 
>> COMports on my box, only USB ports.  How do I configure it to key
> my rig 
>> on CW?  I've missed quite a few cw contests because of this
> shortcoming 
>> of mine.
>>
>> de Red N3TG
>>
>> _______________________________________________
>> CT-User mailing list
>> CT-User@contesting.com
>> http://lists.contesting.com/mailman/listinfo/ct-user
>> CT on the web:  http://www.k1ea.com/
> 
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/
> 
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/
> 
> 
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

<Prev in Thread] Current Thread [Next in Thread>