Travis
For the most part bandpass filters will not help if the interface is
within the 2.4Ghz band (IE the channel you are on). It will just "Notch"
out the frequencies you are working with. It does not "filter" or
"clean" the 2.4Ghz band itself.
Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Travis Brown
Sent: Thursday, June 27, 2002 9:41 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Bandpass filters
Anyone using bandpass filters on your base gear due to dirty tower sites
and such? We have a base (AP-1000) that shows very high noise at the
tower site, and I'm hoping a very narrow bandpass filter will help.
Any thoughts? I would appreciate some feedback from those of you that
have experience with these filters.
Thanks!
Travis
--
==============================
M. Travis Brown, MCSE
Network Systems Engineer
NetWave Internet
434.386.0656
travis@netwaveva.com
http://www.netwaveinternet.com
==============================
|