|
I have a COR running v4.15 with one interface set
as a sattelite for backhaul and the other as ISPbase w/ protocol
filtering. The device is powered across about 150' of cat5.
The device is rebooting all the time. I think
it may be a power issue but the device is getting about 4.79v...even under HEAVY
load. There are 9 clients on this AP now and the problems really started
after I added that last client. I am working to get a different DC
injector to get the power up but it really seems like there is something else
going on. The device will reboot under the following
conditions:
1) if I send it a ping flood
2) if I ping 3 or more clients and open up most any
of the monitoring screens on the config app. (link test, remote monitor,
etc.)
I did just turn up another tower about 5 miles away
and this site can "hear" the other tower just a bit. The problem seemed to
get exponentially worse once the new tower came up. However, it was also
about the same time that we added the additional client.
The FW on both radios is 8.x as I believe they are
loaded with this FW when the COR boots.
There are not to many people doing stuff on the
network this morning but I just change freq's at the new tower (so this site
can't hear it anymore) and things seem to be working fine now.
Anybody have any ideas?
|