-----Original
Message-----
From: karlnet-admin@WISPNotes.com
[mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Bob Hrbek
Sent: Wednesday, December 11, 2002
9:14 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Problem COR
--help!
I have a COR running v4.15
with one interface set as a sattelite for backhaul and the other as
ISPbase w/ protocol filtering. The device is powered across about
150' of cat5.
The device is rebooting all
the time. I think it may be a power issue but the device is getting
about 4.79v...even under HEAVY load. There are 9 clients on this AP
now and the problems really started after I added that last client.
I am working to get a different DC injector to get the power up but it
really seems like there is something else going on. The device
will reboot under the following
conditions:
1) if I send it a ping
flood
2) if I ping 3 or more clients
and open up most any of the monitoring screens on the config app.
(link test, remote monitor, etc.)
I did just turn up another
tower about 5 miles away and this site can "hear" the other tower just a
bit. The problem seemed to get exponentially worse once the new
tower came up. However, it was also about the same time that we
added the additional client.
The FW on both radios is 8.x
as I believe they are loaded with this FW when the COR
boots.
There are not to many people
doing stuff on the network this morning but I just change freq's at the
new tower (so this site can't hear it anymore) and things seem to be
working fine now.