to my mind versions > 4.02 will cause big problems,
4.27, 4.31 are both with bugs, once it even crashed so
badly that we did force reload to a flashrom uniet,
once it destroyed a card firmware inside RG1000 and
the card is blind now.
Toomas
3K Group
:-----Original Message-----
:From: karlnet-admin@WISPNotes.com
:[mailto:karlnet-admin@WISPNotes.com]On Behalf Of John Maxwell
:Sent: Thursday, December 12, 2002 5:34 PM
:To: karlnet@WISPNotes.com
:Subject: [Karlnet] KarlBridge lockups
:
:
:Hey folks,
:
:KarlBridge. Used to be on 4.02 and worked flawlessly. Now,
:put it on 4.31
:and when it reboots, every other light on the Throughput comes
:on and hangs.
:You need to pull the power plug and do a hard reboot to get it
:to come up.
:When you do that, it works fine until you go to reboot it,
:you'd better be
:there.
:
:Ever seen this?
:
:John Maxwell
:Director of Network Operations & Deployment
:RockyWave, LLC
:A WisperTEL Company
:P.O. Box 775
:Conifer, CO 80433
:(303) 475-9871
:fax (303) 238-6535
:
:_______________________________________________
:Karlnet mailing list
:Karlnet@WISPNotes.com
:http://lists.wispnotes.com/mailman/listinfo/karlnet
|