The short of it:
I have an AP-1000 that is routing running ver 4.10 (I think). It is a
Sattelite to another AP-1000. Pings to the backhaul interface are about 5ms
(almost always). Pings to ANY of its clients are 25 - 45ms ALWAYS.
Why?
==============================================
Details:
I have 3 sites running with AP-1000's. SiteA and SiteB use a Trango
backhaul and RG's as clients. SiteC is a satellite of SiteB. The network
is 100% routed.
TrangoAP
/ \
/ \
/ \
SiteA \
| \
| \
/ SiteB
SiteC
SiteA has two interfaces that bridge to a local router...then across the
trango link to the central site
Ping times to any clinet of SiteA or SiteB are about 5 - 12ms under almost
ANY load.
=============
SiteB has Two interfaces that are on seperate subnets and a /29 to a router
at the bottom of the tower. (I like to make things difficult)
===========
SiteC is an AP-1000 as a Satellite of SiteA(a TC polling-network). SiteC
has two interfaces, one for backhaul, the other for local access (also a
polling network). There are 12 clients at SiteC. The AP-1000 is setup as a
router.
Ping times to the backhaul interface of SiteC are about 5ms. Ping times to
ANY clinet of SiteC(all within 1 mile) are 25ms + ALWAYS. Why?
|