[Karlnet] KN-200 PoE

["Norm Young" <lists@applegatebroadband.net>]

I'm trying to power up one of the new KN-200 boards.  I'm looking at the PoE
specs in the User Guide, and it appears that you can use any voltage from
12-48vdc, and any polarity scheme on 4/5, 7/8.  So, I thought I'd go with
roughly 15vdc,  7/8 positive and 4/5 negative.   I'm hoping that this is
correct.  (If so, it's pretty impressive.)

Norm