Hi All,
We have recently commissioned a new site with licensed microwave gear for
backhaul. All this sort of gear and our routers use -48v ie, the neutral &
earth is positive.
We plugged in a KN-205 board off our power supply without the antenna attached
and it worked fine. Once the antenna as connected the board went dead (no
lights) and will now not function again.
Does anyone have any suggestions in what l can do here. I have been
considering changing the polarity of the 48v being feed into the KN-205 via poe
in case it was a polarity miss match.
Thanks,
Phil
_____________________________
Phillip Britt
Managing Director
Wideband Networks Pty Ltd
Phone: 03 5135 6888
Fax: 03 5134 1177
Mobile: 0418 528 521
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.802 / Virus Database: 545 - Release Date: 26/11/2004
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|