Orion
[Top] [All Lists]

[TenTec] Heil ProSet on Orion - reprise

To: tentec@contesting.com, orion@contesting.com
Subject: [TenTec] Heil ProSet on Orion - reprise
From: Duane A Calvin <ac5aa@juno.com>
Reply-to: tentec@contesting.com
Date: Thu, 22 Jul 2004 09:20:24 -0500
List-post: <mailto:tentec@contesting.com>
I am still working on a solution to my ProSet / Heil adapter / Orion TX
audio hum situation - thanks to many of you for very helpful hints.   One
thing I wanted to post for others who may stumble into this same
situation is one of the "helpful fixes" NOT to do.  Bob Heil's web page,
which was referenced somewhere along the way, describes tying the 
microphone shield pin (pin 2 on the Orion) to the mic connector shell. 
(Here: http://www.heilsound.com/harmonics.htm#RFI)  Do NOT do this on the
Orion!  Paul Clinton verified with me yesterday that the Orion does not
take kindly to making that connection, and I can verify that.  I'm still
working down through the options to determine which one will work, and
I'll report back when I've found the solution.

        73,  Duane


Duane Calvin, AC5AA
Austin, Texas
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Heil ProSet on Orion - reprise, Duane A Calvin <=