Hi Ken,
At this point of your troubleshooting, you aught to approximately
know "what RF power level" damages your router. Before you
reach that damage to hardware level, I would expect you to
have experienced significant disruptions to your network traffic.
Suggestion for troubleshooting. Open a continuous ping sessions
between your PCs and/or your router. Example: ping "ip address" -t
As you slowly raise your RF level - I would expect you will find a
sweet spot before significant disruption of network traffic occurs.
At this point, starting experimentally adding (gasp) on your ferrite
beads, you aught to learn something very fast now.
GL & 73's
Dave - wb9own
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|