RFI
[Top] [All Lists]

Re: [RFI] Air Conditioner / Heat Pump recommendations

To: Bob Turner <n2scj-lists@outlook.com>
Subject: Re: [RFI] Air Conditioner / Heat Pump recommendations
From: David Propper <k2dp@charter.net>
Date: Sun, 24 Feb 2019 08:34:25 -0600
List-post: <mailto:rfi@contesting.com>
Hi all,

Sri for the typo, the manufacturer is TRANE.

The system is located approximately 60-75 feet from the antennas (tower, 
inverted V, etc)

73,
Dave, K2DP

> On Feb 23, 2019, at 9:08 AM, Bob Turner <n2scj-lists@outlook.com> wrote:
> 
> How far away from the antennas?
> 
> 7 3  Bob
> N2SCJ
> 
> -----Original Message-----
> From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of David Propper
> Sent: Saturday, February 23, 2019 9:52 AM
> To: Rob Atkinson <ranchorobbo@gmail.com>
> Cc: Reflectors - RFI@contesting.com <rfi@contesting.com>
> Subject: Re: [RFI] Air Conditioner / Heat Pump recommendations
> 
> All,
> 
> I also just replaced my complete HVAC system (AC and gas furnace, air 
> handler, etc) this past September. I chose a Trade system with a “non 
> variable speed” motor in the air handler.  No RFI 160-2 meters as far as I 
> can tell.  The HVAC air handler and furnace are located less than 40 feet 
> from the shack.
> 
> The variable speed motors and controllers seem to be where the RFI generates 
> from.
> 
> FWIW,
> Dave, K2DP
> 
>> On Feb 22, 2019, at 1:33 PM, Rob Atkinson <ranchorobbo@gmail.com> wrote:
>> 
>> Thanks Jim!
>> 
>> R.A.
>> 
>>> I think you have correctly identified the key element of the product 
>>> description, Rob!
>> 
>>> 73, Jim K9YC
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
> 
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>