RTTY
[Top] [All Lists]

[RTTY] Do u know where your fuses are ...?

To: rtty@contesting.com
Subject: [RTTY] Do u know where your fuses are ...?
From: Jerry Pixton <jpixton@shentel.net>
Date: Mon, 29 Sep 2003 11:22:31 +0000
List-post: <mailto:rtty@contesting.com>
Do you know where your fuses are in the depth of a contest?

After carefully lowering my antennas several weeks ago before being visited by Isabel, I saved all of them and raised them up last week. Since my FT1000mp has been in the repair shop all summer, I decided to start the contest with 1 and 1/4 radios. I was to use my old IC751 for Running (it still has nice rtty filters) with my Quadra amplifier(which is supposed to change bands) and use the IC756 Pro II for S&P.

And then the contest started. And Murphy visited fast. The Quadra would not change bands! Ugh. OK, I guess that the IC751 will be a dedicated 20m radio. But the only thing the computers control on it is FSK and PTT. And so it went the first night.

But the next morning, I found that I could not continue to tune the IC756 as a S&P radio in the awkward position it was in. So mid morning I decide to move the radio and give up the IC751 with its amp and go SOSR. OK, stop the contest while I change this. Some time later, I have all the cables undone, radios and amps moved and try to power up the IC756 Pro II. What no power? The power switch will not power on the radio. Remove all cables except DC. Still no power up. Now I am Single Op with NO radios. Time for a break.

As I am cutting the lawn, I think. I wonder if there is an internal fuse. Back to the manual. Yes, you only have to remove 30 screws and two panels and there it is. And it is blown!. Now were did I put those spare fuses when I unpacked the radio last year? After much searching, I found a 5 amp fuse. Try it. Yes, power! Now to put the covers back on. OK, BUT as soon as I hook up my filter switching and band decoding stuff, the power goes off! What? At least it was the quick trip on the power supply, not the fuse. Ok, I don't need filters with only one radio, so leave that cable unplug.

Back into the contest. Let's get a run going to make up for many hours off. And so it went. Only managed to kill the rtty window once during the rest of the test, but WinXP kept running and so I quickly recover.

So this morning I can find out what is wrong with the decoder and filter switching stuff. And re-think my station.

Good contest, lots of stations, many more 5 banders then in past. Actually did within 10 percent of my Single Op Two Radio performance last year in less hours and worse band conditions. Even worked several new rtty countries.

Good dx.

Jerry, W6IHG
------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------


_______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>
  • [RTTY] Do u know where your fuses are ...?, Jerry Pixton <=