In order to key FSK, you must supply on/off (short/open) keying to the FSK input
of the radio.
This is normally done in various ways - TNC FSK output, RigBlaster FSK output or
a simple transistor circuit coming from a COM serial port on the PC.
For a simple transistor keying circuit to key FSK (and PTT, CW), see:
http://www.aa5au.com/rttyinterface.html
73, Don AA5AU
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On Behalf
Of ON6LY_TEL
Sent: Wednesday, December 29, 2004 10:02 AM
To: RTTY@contesting.com
Subject: [RTTY] QUESTION
HELLO
I´VE USING A IC746 WITH RTTY VIA SOUNDCARD NOW ALL IS WORKING OK ON LSB AND USB
BUT WHEN I SWITCH TO RTTY MODE HE JUST GIVE ONE TONE IN TX RX IS OK IS THERE A
SOLUTION, BEST 73 AND HAPPY 2005 TO ALL ON6LY FRANCIS
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|