RTTY
[Top] [All Lists]

Re: [RTTY] Slow FSK

To: "'Ian S. Amos'" <ve3esh@cogeco.ca>, <rtty@contesting.com>
Subject: Re: [RTTY] Slow FSK
From: "Joe Subich, W4TV" <k4ik@subich.com>
Date: Tue, 11 Oct 2005 20:45:30 -0400
List-post: <mailto:rtty@contesting.com>
Ian, 

There is an issue with microHAM Router 2.2.2 that causes the "slow 
FSK" for users of microKEYER.   Our programmer implemented an "emulate 
baud" function in the OEM supplied USB chipset drivers.  That function 
was intended to make virtual ports using the USB interface behave more 
like hardware UARTs and eliminate the need for patches like MMTTY's 
"limiting speed."  

Unfortunately, the emulate baud function is buggy and does not report 
buffer conditions properly (quickly enough).  

Emulate baud was removed in Router 2.2.3 and subsequent versions. 
You will want to upgrade to Router 2.2.3 or 3.0.1. 

Router 2.2.3 
      www.microham.com/Downloads/urouter_release_02_02_03.exe

Router 3.0.1 
      www.microham.com/Downloads/urouter_release_03_00_01.exe

Either will work for you.  Router 2.2.3 can be installed directly over 
2.2.2.  I recommend uninstalling Router 2.2.2, and rebooting before 
installing 3.0.1 (although it may not technically be required).

By the way ... for anyone wondering if they have a "Slow FSK" 
problem, this line is exactly 50 characters long: 

THE QUICK BROWN FOX JUMPED OVER THE LAZY DOGS BACK

With CR/LF after each line, seven repetitions are 364 characters. 
If your software is operating "at speed" a buffer with the seven 
lines should transmit in 1:01 (one minute, one second).  

73, 

   ... Joe Subich, W4TV 
       microHAM America, LLC 
       www.microHAM-USA.com 
 



> -----Original Message-----
> From: rtty-bounces@contesting.com 
> [mailto:rtty-bounces@contesting.com] On Behalf Of Ian S. Amos
> Sent: Tuesday, October 11, 2005 5:30 PM
> To: rtty@contesting.com
> Subject: [RTTY] Slow FSK
> 
> 
> Hi All
> 
> I just got Phil's, GU0SUP post on slow FSK.  I am glad you 
> noticed this as 
> I also heard this a few times during the contest and wondered 
> what it was 
> all about.   I also had know idea I was in the same boat.
> 
> I am running an ICOM 706 with FSK using Writelog, MMTTY 
> plugin and the 
> microHAM KEYER.  I have just update the my microHAM USB device router 
> software to version 2.2.2 from a version 1 and was playing 
> around with all 
> kinds of set and initially thought I had done something here. 
>  However I 
> come across a simpler answer as to why the slow FSK happens, I hope.
> 
> Joe K0BX posted this on the Writelog reflector that I think will help.
> 
> 
> What you want to check for, is to go to the MMTTY version while in WL.
> right click and go to options on the MMTTY plugin.  Then to setup.
> 
> Go to the TX menu tab and bring up the TX option screen.
> What you want to look for is the:
> "Char Wait" and "Diddle Wait" slide bar box.
> Make sure that the slide bar is all the way to the LEFT.  
> Moving it to the
> right will cause the output character rate to slow down.  
> This was for slow
> typest and was a feature on the UT-4B that was using with the ST-6.
> 
> So I checked all of my profiles as well as and re-saved them 
> with the Char. 
> wait slider to the left in MMTTY as these are the same 
> profiles used by the 
> plugin in Writelog.
> 
> I am going to do an on the air test later on to check.  If 
> anyone has more 
> ideas please let me know
> 
> Hope this helps
> 
> Thanks
> 
> Ian
> VE3ESH
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>