> K2 or most any Kenwood model.
The K3 identifies as a TS-570. Either the K2 setting -
or the general "Kenwood" setting (not TS-850) should
work. However, since the K2 did not use handshaking
(unlike Kenwood), using the K2 setting would be a bit
more flexible - and would allow CW/PTT to share one
serial port with radio control if you need it.
73,
... Joe, W4TV
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of Ed Muns
> Sent: Monday, June 23, 2008 10:52 PM
> To: 'Rick Mintz'; writelog@contesting.com; 'RTTY Mailing List'
> Subject: Re: [RTTY] Using a K3 at Field Day
>
>
> > Does anyone know what rig choice in Writelog we should use to
> > allow rig control of the Elecraft K3?
>
> K2 or most any Kenwood model.
>
> 73,
> Ed - W0YK
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|