Right, For my Kenwood TS-2000 the Normal setting in the rigs menu is
backwards but with my Pro-3 it is correct so obviously there is no standard
for the manufacturers as to which way is inverted in FSK. You could be
receiving just fine but transmitting inverted without knowing it unless
someone tells you.
73,
Tom, KE1JF
--------------------------------------------------
From: "Doug Faunt N6TQS +1-510-655-8604" <faunt@panix.com>
Sent: Monday, February 14, 2011 1:38 PM
To: <rtty@contesting.com>
Subject: Re: [RTTY] Upside down
> If someone is transmitting upside down, please tell them! It's often
> not obvious. My first RTTY contact was apparently with someone who
> copied and said nothing. My second was with someone who told me. Many
> thousands followed after I fixed the problem. But anytime I have a new
> setup, it's possible to be inverted again. And when I'm on a
> DXpedition, I have a macro for "u r inverted".
> 73, doug
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|