Just noting the various comments. I use the Microham 2 with built in Winkey
and it is a brilliant interface with no problems whatsoever. No RFI even
with the Linear amp on. It does all modes including Data and is the perfect
single interface unit and used by several station around Norwich.
The only mod which I did was the decoupling capacitor between the USB
connector screen and the DB37 screen (official Microham mod)
It at least contains everything in the one box.
Strange that you had such a poor experience with it.
73
Malcolm G3PDH
-----Original Message-----
From: sd-user-bounces@contesting.com [mailto:sd-user-bounces@contesting.com]
On Behalf Of Rob - G4LMW
Sent: 20 February 2010 13:08
To: sd-user@contesting.com
Subject: Re: [SD-User] ref Keying
John
Thanks for the kind offer.... I'd rather borrow your QTH though! - another
thumping signal in the last CC.
As I said, I have had no issues at all with PC keying - maybe I am just
lucky. As it happens, I sold the Microkeyer II yesterday. It belonged to the
club so I was just trying it for myself (my Orion happened to come with the
Microham cable). Like you, the main reason for trying the Miocroham gear was
that it purported to do everything (incl datamodes).
If I start having keying problems, I'll look at the WinKey. It does look
like excellent value.
Not wishing to tempt fate, but I wonder WHY I have no CW keying issues???
73, Rob
G4LMW
http://www.G4LMW.co.uk
----- Original Message -----
From: "John Muzyka" <g4rcg@yahoo.co.uk>
To: <sd-user@contesting.com>
Sent: Saturday, February 20, 2010 6:31 AM
Subject: [SD-User] ref Keying
Hi Rob,
I agree with Paul fully about keying in Windows, I have used winkeys 1 & 2
and am now using the Winkeyer USB box which is really reliable and like Paul
says intergrates with all looging and contest programmes I use, they are
cheap enough to buy but sometimes you get hit with a bit extra if Royal Mail
decide to charge you the VAT element and their handling charge when its
delivered. I have had lots sent to me to build up straight from the states
and had a couple where I had to pay extra when it arrived, but its still
worth it.
As for Microham, I bought last year a Microham II to do all my data and CW,
and all it did was lock up and send C**P CW as if RF was getting into it,
got in touch with Microham direct and they told me to do all sorts to it and
they told me they had some issues with RF (if you look at the trouble
shooting page it is listed there) I dont have any RF issue at all with
anything else, after a week or more I sent it back to Waters & Stanton, told
them it was not fit for purpose and got my money back. I wont be buying
another!!!!
So get yourself a Winkey II, if you want to try one I have a Com Port
Version (I use the USB version now, it has more functions) which you are
welcome to borrow to try. Contact me via the email address below if you do.
Cheers
John G4RCG
g4rcg@yahoo.co.uk
________________________________
From: "sd-user-request@contesting.com" <sd-user-request@contesting.com>
To: sd-user@contesting.com
Sent: Thu, 18 February, 2010 20:00:03
Subject: SD-User Digest, Vol 86, Issue 8
Send SD-User mailing list submissions to
sd-user@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/sd-user
or, via email, send a message with subject or body 'help' to
sd-user-request@contesting.com
You can reach the person managing the list at
sd-user-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of SD-User digest..."
Today's Topics:
1. SD and windows keying (DAVID BUTLER)
2. Re: SD and windows keying (Paul O'Kane)
3. Re: SD and windows keying (Rob - G4LMW)
----------------------------------------------------------------------
Message: 1
Date: Thu, 18 Feb 2010 11:28:50 +0000 (GMT)
From: DAVID BUTLER <g4asr@btinternet.com>
Subject: [SD-User] SD and windows keying
To: sd-user@contesting.com
Message-ID: <23297.1054.qm@web86503.mail.ird.yahoo.com>
Content-Type: text/plain; charset=utf-8
Quote: "SD integrates with WinKey to eliminate CW timing issues caused by
Windows."
I haven't tried this yet but why can't I use SD to drive the built-in keyer
inside my FT-2000 to eliminate
CW timing issues caused by Windows. Or is it a little bit more complicated
than this.
I only ask because as far as I can tell Winkey is a stand-alone keyer - and
theoretically so is the keyer in the FT-2000.
Furthermore I can adjust all sorts of CW parameters within the menu system
to integrate with SD, can't I?
Also are the CW timing issues caused by all versions of Windows. Is it the
same with Windows7?
73 David G4ASR
------------------------------
Message: 2
Date: Thu, 18 Feb 2010 13:56:29 -0000
From: "Paul O'Kane" <pokane@ei5di.com>
Subject: Re: [SD-User] SD and windows keying
To: <sd-user@contesting.com>
Message-ID: <51A84E91B7264E7DA4120C566B349B8C@paul>
Content-Type: text/plain; format=flowed; charset="Windows-1252";
reply-type=original
----- Original Message -----
From: "DAVID BUTLER" <g4asr@btinternet.com>
> why can't I use SD to drive the built-in keyer inside my
> FT-2000 to eliminate CW timing issues caused by Windows.
Because each rig tends to have a different set of commands
to control keying - a bit like rig control, only more variable.
The main advantage of WinKey is that it is supported by all
major contest loggers, and it is truly integrated in that
it returns its status to the control software at all times.
You can stop its keying instantly by touching a paddle, and
then continue sending manually at the same speed.
WinKey is embedded in all microHAM keyers.
There's an internal keyer in my Icom Pro3, but I wouldn't
consider using it instead of WinKey.
> Also are the CW timing issues caused by all versions of
> Windows. Is it the same with Windows7?
Yes and Yes, but you may be lucky with your PC's setup or
configuration. From my point of view, I don't want any
hiccups in my keying - other stations might think I'm
causing them :-)
73,
Paul EI5DI
------------------------------
Message: 3
Date: Thu, 18 Feb 2010 14:11:29 -0000
From: "Rob - G4LMW" <g4lmw@btconnect.com>
Subject: Re: [SD-User] SD and windows keying
To: <sd-user@contesting.com>
Message-ID: <4C32F1C9AC4942678058652F0BE20370@rob>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
I've never actually experienced any keying issues with direct keying
(running XP SP1, SP2 then SP3) using SD or any other software.
However, I did try a Micoham MKII but all it did was generate noise across
all bands so that was quickly removed.
I have the Microkeyer, in its box, barely used if anyone wants to make a
sensible offer, given that it is virtually new!
73, Rob
G4LMW
http://www.G4LMW.co.uk
----- Original Message -----
From: "DAVID BUTLER" <g4asr@btinternet.com>
To: <sd-user@contesting.com>
Sent: Thursday, February 18, 2010 11:28 AM
Subject: [SD-User] SD and windows keying
> Quote: "SD integrates with WinKey to eliminate CW timing issues caused by
> Windows."
>
>
> I haven't tried this yet but why can't I use SD to drive the built-in
> keyer inside my FT-2000 to eliminate
> CW timing issues caused by Windows. Or is it a little bit more complicated
> than this.
>
> I only ask because as far as I can tell Winkey is a stand-alone keyer -
> and theoretically so is the keyer in the FT-2000.
> Furthermore I can adjust all sorts of CW parameters within the menu system
> to integrate with SD, can't I?
>
> Also are the CW timing issues caused by all versions of Windows. Is it
> the same with Windows7?
>
> 73 David G4ASR
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
------------------------------
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
End of SD-User Digest, Vol 86, Issue 8
**************************************
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.725 / Virus Database: 271.1.1/2703 - Release Date: 02/23/10
07:34:00
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|